Download Print this page
Sealey VS400 Instructions
Sealey VS400 Instructions

Sealey VS400 Instructions

Vacuum system test kit

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS
AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE
TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
1. SAFETY INSTRUCTIONS
Familiarise yourself with the applications and limitations, as well as any potential hazards, of the kit.
!
Keep this product in good working order and condition (take immediate action to repair or replace damaged parts).
!
Use approved parts only (unapproved parts may be dangerous and will invalidate the warranty).
!
Wear approved eye protection. Contact your Sealey dealer for details.
!
Keep children and unauthorised persons away from the work area.
!
Keep work area clean and tidy and free from unrelated materials.
!
Ensure the work area has adequate lighting.
!
DO NOT use the kit to perform a task for which it is not designed.
%
DO NOT allow untrained persons to use the kit.
%
DO NOT use whilst under the influence of drugs, alcohol or intoxicating medication.
%
After use, clean equipment, place in case and store in a cool, dry, childproof area.
!
Dispose of waste liquids in accordance with local authority regulations.
!
WARNING! DO NOT pollute the environment by allowing uncontrolled discharge of fluids.
F
2. CONTENT
Check the contents of the case against the list below. If any item is missing or damaged contact your supplier immediately.
A - Vacuum Gun and Gauge
B - Vented Cap
C - 24” x !/4”ID Tubing x2
D - Fluid Container
INSTRUCTIONS FOR:
VACUUM SYSTEM TEST KIT
Model No:
E - Sealing Lid (container)
F - Extension Tubes, 1/4”ID x 2, 1/8”ID x 2
G - Bleed Nipple Adaptors x 3
H - Suction Cup
VS400
I - Tube End Cones x 6
J - Gun Cones x 2
K - Tube Adaptor
L - Hose Cone
VS400 - 0021 - (1) - 181000

Advertisement

loading

Summary of Contents for Sealey VS400

  • Page 1 VS400 Model No: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
  • Page 2 3. INTRODUCTION The VS400 vacuum gun is capable of maintaining depressions of up to 25in(64cm)Hg and has a displacement of 1in (16ml) per stroke. Accessories are supplied to allow single handed brake and clutch bleeding, the testing of vacuum actuated switches and modulators and many other applications.