Download Print this page

Troubleshooting Guide - Kenwood FP19 Instructions Manual

Advertisement

Designed and engineered by Kenwood
l
in the UK.
Made in China.
l
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product
must not be disposed of as urban waste. It
must be taken to a special local authority
differentiated waste collection centre or to
a dealer providing this service.

Troubleshooting Guide

Problem
The processor will not
operate
Blender will not operate
Processor stops during
processing
Cause
No Power
Bowl and lid not fitted and
locked on correctly.
Blender not located
correctly on outlet.
Processor overloaded/
maximum capacities and
operating times exceeded.
Lid unlocked
9
Guarantee UK only
If your food processor goes wrong
l
within one year from the date you
bought it, we will repair it (or replace it
if necessary) free of charge provided:
it has been used in accordance with
l
these instructions.
you have not misused, neglected, or
l
damaged it;
it has not been modified (unless by
l
KENWOOD);
it is not second hand;
l
it has not been used commercially;
l
you have not fitted a plug incorrectly;
l
and
you supply your receipt to show when
l
you bought it.
This guarantee does not affect your
statutory rights.
Solution
Check processor is plugged
in.
Check that lid interlock is
located correctly with the
arrow on the lid aligning
with the line on the power
unit.
Check that blender is fitted
correctly.
Refer to recommended
usage chart for correct
quantities and operating
times.

Advertisement

loading

This manual is also suitable for:

Fp12