How To Set Up Pd1161 On Windows/Mac; How To Connect The Pd1161 - GAOMON PD1161 Faq

How to set up PD1161 on Windows/Mac?

2.

2.1 How to connect the PD1161?

1.As shown on the below, connect the pen display to your computer with attached power adapter,
HDMI cable and USB Cable.
1) Connect your PC and the display with integrated cable.
2) Plug the power adapter into the cable power connector and turn it 90 ° to ensure that the plug
does not come off and connect the power adapter to the power source.
3) Turn on computer and switch on the display, the LED indicator will show the current status:
Green means working normal, Red means no signal.
Please remember to press the power button of the display to power on the display
2.If you use a desktop, please read this step carefully. If not, please read the next step.
When you are using a desktop computer, please note that the number 1 (standard HDMI type A)
connector should plug into the HDMI socket of the graphics card (in Area B), not that of the
mainboard (in Area A).
Below is the rear of a computer, just for an example.
4