Related Manuals for Argos Jenson 876/9109
Summary of Contents for Argos Jenson 876/9109
- Page 1 Jenson Mirror 876/9109 Spare Parts Customer Support Visit: www.argos-support.co.uk Call: 0345 640 2020 Email: Help@ClickSpares.co.uk Call: 0330 016 1114 Issue 1 - 16/10/20...
-
Page 2: Care Advice
Safety Important - Please read these instructions fully before starting assembly • WARNING: To prevent • Warning: This unit weighs possible overbalancing this unit approximately 40kgs. must be secured to a wall using Please lift with care. the 2 overbalance protector kits •... -
Page 3: Cabinet Panels
Cabinet Panels Please remove protective film from any gloss panels 3 855 x 22.8cm 855 x 22.8cm 855 x 22.8cm 4 119.9 x 23cm 5 56.65 x 35.5cm 9 59.4 x 37.4cm x 10 6 57.15 x 5.8cm 7 55.9 x 14cm 10 59.4 x 46.2cm 8 55.9 x 6.5cm... - Page 4 Fittings Use these drawings to correctly identify the fittings Bag 1 x 26 x 26 x 23 x 34 Bag 2 x 32 x 32 Tools Only used for drilling walls...
- Page 5 Fittings Shoe Boy Kit Tools Only used for drilling walls...
- Page 6 IMPORTANT: Panel 1 and Panel 2 have drillings on only 1 face Finished front edge Finished front edge...
- Page 7 x 10 IMPORTANT: Panel 3 is 22mm thick with through-holes Finished front edge...
- Page 8 Finished front edge x 10 x 10 Finished front edge...
- Page 9 Finished Finished front edge front edge Finished front edge Finished front edge IMPORTANT: Support panels until the divider panel is fitted in the next step...
- Page 10 Finished front edge x 10 x 10 Finished front edge...
- Page 11 IMPORTANT: Support panels until the end panel is fitted in the next step Finished front edge Finished front edge Finished front edge Finished front edge...
- Page 12 Only use 1 Screw to fit each Bracket Finished front edge Finished front edge...
- Page 13 Squaring up a Chest and fitting the Back Panel www.youtube.com/watch?v=FeaI6541z7o A = B Make sure measurement A and B are the same before attaching back panels IMPORTANT: IMPORTANT: You will need to keep 8 DO NOT nail where nails for the next step the Back panels meet x 26...
- Page 15 WARNING! In order to prevent overturning this product must be used with the 2 wall attachment devices provided See the next section for a guide to wall mounting and fixings Carefully stand the unit up and push it up against the wall.
-
Page 16: A Guide To Wall Mounting & Fixings
A Guide to Wall Mounting & Fixings Important: When drilling into walls always Important note: check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit. - Page 17 x 12 Finished Shaped edge Warning: Glass! Handle with care Finished front edge...
- Page 18 Finished front edge IMPORTANT: Support panel until the other shoe boy is fitted in the next step...
- Page 19 x 12 x 16...
- Page 21 Door Stop IMPORTANT: Lift and position the Doors so that the Door Stops are fitted between the 2 lugs at the top of the Shoe Boys...
- Page 22 Assembly is complete Please remove any blue protective film from panel edges and clear protective film from panel surfaces and clean the mirror...
- Page 24 ALR3702...
Need help?
Do you have a question about the Jenson 876/9109 and is the answer not in the manual?
Questions and answers