Charging The Battery - Panasonic FZ-N1 Series Operating Instructions Manual

Getting started

Charging the battery

•
The battery is not charged at the time of purchase. Charge the battery before turning on the unit for the
first time or after an extended period of storage.
Using the AC adaptor (FZ-AAE184E) to charge the unit
1.
Face the USB mark of the USB connection cable upward, and connect the AC adaptor (A) and the
unit (B).
2.
Plug the power plug (C) of the AC adaptor into a power outlet.
•
The shape of the power plug varies depending on your country.
•
Charge the battery in environments with an ambient temperature of 10 °C to 35 °C (50 °F to 95 °F).
•
The indicator lights in orange while the battery is charging, and lights in green when charging is
complete.
•
The unit prevents overcharging of the battery by charging only when the remaining battery level is
less than approximately 95 % of its full capacity.
•
You can also charge the unit by connecting it to the USB port of a computer or other device using
a USB connection cable.
Note
•
When removing the USB connection cable, make sure to remove it while holding the plug. Do not
pull by the cable.
•
When connecting a USB connection cable, note the shape of the micro USB plug and the micro USB
port. Do not attempt to connect the USB connection cable upside down.
•
Remove any dust or water droplets from plugs before connecting them. Do not use excessive force
when inserting plugs or insert them at an angle.
Using optional accessories to charge the unit
If FZ-AAE184E is not supplied, you can charge the unit by using the optional Charging Cup and the optional
adaptor. For more information, refer to the Operating Instructions of the Charging Cup.
•
Optional accessories
Charging Cup: FZ-VCBN11U
AC Adaptor: CF-AA6373A
20 Operating Instructions - Reference Manual