Advanced Network Settings - Samsung ET-WV530 User Manual

This section contains settings which can change the way the router handles certain types of traffic. We recommend that you
not change any of these settings unless you are already familiar with them or have been instructed to change them by one of
our support personnel.
UPnP:
UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking
equipment, software, and peripherals. The device is a UPnP enabled router, meaning it will work with other UPnP devices/
software. If you do not want to use the UPnP functionality, it can be disabled by selecting "Disabled".
The following parameters can be configured:
Enable UPnP:
WAN Ping:
When you Enable WAN Ping response, you are causing the public WAN (Wide Area Network) IP address on the device to
respond to ping commands sent by Internet users. Pinging public WAN IP addresses is a common method used by hackers
to test whether your WAN IP address is valid.
The following parameters can be configured:
Enable WAN Ping:
WAN Port Speed:
This allows you to select the speed of the WAN interface of the router: Choose 100Mbps, 10Mbps, or 10/100Mbps Auto.
The following parameters can be configured:
WAN Port Speed:
S W R
AMSUNG IRELESS OUTER
A
DVANCED
Tick this option to enable the UPnP feature of the router.
Tick this option to enable the WAN Ping Response option of the router.
You may set the port speed of the Internet port to 10Mbps, 100Mbps, or auto. Some older
cable or DSL modems may require you to set the port speed to 10Mbps.
U M
SER ANUAL
N S
ETWORK ETTINGS
P 55
AGE