Network Filter - Samsung ET-WV530 User Manual

The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Address of
the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be
configured to ALLOW or DENY network/Internet access.
In the MAC Filtering Rules section, the user can create and edit Network filter rules. This maximum amount of rules that
can be created are 24 rules.
The following parameters can be configured:
Configure MAC Filtering:
Checkbox:
MAC Address:
DHCP Client List:
Schedule:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S W R
AMSUNG IRELESS OUTER
N
ETWORK
Select Turn MAC Filtering OFF, Turn MAC Filtering ON and ALLOW computers
listed to access the network, or Turn MAC Filtering ON and DENY computers
listed to access the network from the drop-down menu.
Check the box on the left side to enable the Network Filter.
Enter the MAC address you would like to use in this filtering rule.
Select a DHCP client from the Computer Name drop-down menu and click << to copy that
MAC Address.
The schedule of time when the Network Filter will be enabled. The schedule may be set to
Always, which will allow the particular service to always be enabled. Click the New Sched-
ule button to create your own times in the Schedules page.
U M
SER ANUAL
F
ILTER
P 43
AGE