Canon PowerShot G6 User Manual page 157

You must install the software and driver bundled on the
supplied Canon Digital Camera Solution Disk onto your
computer before connecting the camera to a computer.
The camera will not operate correctly if you connect it to your
computer before installing the driver and software. If this
happens, please refer to the Troubleshooting section of the
Software Starter Guide.
You do not need to turn off the camera or computer power when
making a USB connection.
Please refer to your computer's manual for information regarding
the location of the USB port.
You are recommended to use a fully charged battery pack or
Compact Power Adapter CA-560 (sold separately) to power the
camera when connecting to a computer (p. 18, 189).
All procedures performed with a connection to a USB 2.0
compliant board are not guaranteed.
1
Install the driver and the software applications
bundled on the Canon Digital Camera Solution Disk.
Please see the Software Starter Guide for the installation
procedures.
With a Macintosh, it is next necessary to set the
ImageBrowser on automatic start. For further details, please
see the Software Starter Guide.
153