Canon PowerShot G6 User Manual page 149

3
Select images for printing.
Single Images
When the print type (p. 146) is set to
[Standard] or [Both], select an image
using the main dial or the
on the omni selector. You can set the
number of copies (up to 99) to be printed
using the
selector.
When the print type (p. 146) is set to
[Index], select an image using the main
dial or the
selector and mark or remove marks from
images using the
omni selector. A check mark appears on
the marked image.
You can use the same procedures to
select images in index playback (3 images). Press the
to switch between single image playback and index playback.
All the Images on a CF Card
Press the
playback (3 images).
You can set one copy of each image to
print by pressing the SET button, then
selecting [Mark all] using the
arrow on the omni selector, and pressing
the SET button again.
When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print
settings can be deleted. For the
instructions on changing settings, please
reread Step 3 from the beginning.
You can cancel all the settings by
selecting [Clear all].
4
Press the MENU button.
The selection mode will turn off and the Print Order menu will
reappear.
or
or arrow on the omni
or arrow on the omni
or arrow on the
button to switch to index
arrow
or
Number of
Copies
button
145