Table of Contents
Advertisement
cleaning or replacing the filter.
Rotate the
NOTE
You can also select the function that you want to use by pressing
the
button repeatedly until it appears on the remote control
display.
remote control display for three seconds and then disappears.
Controlling the indoor units individually
Use the Zone function to choose the indoor unit you want to operate
Rotate the
NOTE
You can also select the function that you want to use by pressing
the
button repeatedly until it appears on the remote control
display.
numbers, contact a service centre.
The current Zone function settings persist even if you change the
current mode or you turn off and then turn on the remote control.
The zone selection you made using the remote control is reset when
the remote control batteries are replaced.
You can select either one or all of Zone 1 to Zone 4.
Select Filter
Filter Reset appears on the
Zone 1 to control only the indoor unit 1.
Select one from
English
17
Advertisement
Table of Contents
