Table of Contents
Advertisement
Maintaining Water and Dust
Resistance
CAUTION! To avoid electric shock and damage to your
device, do not charge device while it is wet or in an area
where it could get wet. Do not handle device, charger or
cords with wet hands while charging.
This device is rated 5ATM. Your device is water resistant
up to 50 meters per ISO standard 22810:2010. Not
intended for scuba diving. Avoid excessive, sudden
temperature changes, and high velocity activities.
Falls and shocks may breach integrity. After use in
sea water, rinse in fresh water and dry device. Despite
this classification, your device is not impervious to
water damage in any situation. It is important that all
compartments are closed tightly.
Note: If any liquid is found to have entered your device
components or an internally sealed system, this
condition will void your device warranty.
Legal
Follow these tips carefully to prevent damage to the
device.
•
•
•
Note: This device passed military specification
(MIL‑STD‑810G) testing against specific conditions,
including drops from 4.9 feet, extreme temperatures,
dust, shock/vibration, and low pressure/high altitude.
Device may not perform as described in all extreme
conditions.
DRAFT–FOR INTERNAL USE ONLY
104
Whenever your device gets wet, dry it thoroughly
with a clean, soft cloth. Failure to rinse the device in
fresh water and dry it as instructed may cause the
device to suffer from operability or cosmetic issues.
Do not expose the device to water at high pressure.
If the device is dropped or receives an impact, the
water and dust resistant features of the device may
be damaged.
Advertisement
Table of Contents
