Table of Contents
Advertisement
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
7 Removal and installation / 7.2 Removing the turbocharger
© Copyright 2020 . All rights reserved.
Fasten separate lifting gear to each of the two ribs on the bearing
u
casing provided for this purpose.
Ribs (01) not in the middle at the top:
w
Completely remove the bearing casing insulation (02) and place a
u
sling around the bearing casing.
Loosen the fixing screws at the foot.
u
Lift the turbocharger off the engine and set it down to one side.
u
HZTL2498_EN
Rev.F
December 2020
Advertisement
Table of Contents
