Camera Control; Add (Pair) A Camera; View A Camera; Delete A Camera - Hubble Nursery Pal Crib Edition User Manual

3.9 Camera Control

3.9.1

Add (pair) a camera

1. Tap the in the menu bar.
2. Tap , /
3. Tap /
Note: If a camera is currently paired with the Parent Unit, its camera
location (in dark grey colour) cannot be selected for a new registration.
Press and hold the PAIR button on the underside of the Baby Unit until
4.
the Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
3.9.2

View a camera

1. Tap the in the menu bar.
2. Tap , /
3. Tap /
3.9.3

Delete a camera

1. Tap the in the menu bar.
2. Tap , /
3. Tap /
delete button to delete that registration.
Note:
You cannot delete the camera if there is only one registered camera in the
Parent Unit.
3.9.4

Scan cameras

This function is only available when you have more than 1 Baby Unit
(Camera).
1. Tap the in the menu bar.
2. Tap , /
3. The parent unit will scan between registered cameras stopping briefly
on each registered camera for approx. 12 seconds.
18
/ / will appear.
/ / to select the desired Camera location.
/ / will appear.
/ / to select the desired Camera.
/ / will appear.
/ / to select the desired Camera and tap Press to
/ / will appear.
Using the Baby Monitor