Rinse Aid Indicator ( ); End Of Program; Water Cut-Off Warning - Blomberg DWT 81900 FBI User Manual

6.9 RINSE AID INDICATOR ( )

Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher
or not. You need to refill the rinse aid
reservoir with rinse aid whenever rinse aid
indicator appears on the display of your
machine.
Adjusting the amount of rinse aid
1. After switching on your machine,
press the Menu key for 1 second.
2. Using <- and +> keys, proceed to
"P:" on the display.
3. Set to the appropriate level with the
Selection key.
4. Press the Menu key to exit the
settings menu. Your setting will be
saved automatically.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in
P:2 position.
3 doses of rinse aid are dispensed in
P:3 position.
4 doses of rinse aid are dispensed in
P:4 position.

6.10 END OF PROGRAM

C
When the program you have
selected comes to an end,
an audible warning signal
will warn you to turn off your
machine. This audible signal
will warn you with certain
intervals before it turns off.
End of Program indicator will light up
when the washing program is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the
socket.
C
For energy saving, the
machine is automatically
turned off following the
completion of the program or
if the program is not started.
C
Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying effectiveness of your
machine.
6.11 WATER CUT-OFF
WARNING
If mains water is cut or water inlet
tap is turned off the machine cannot
take water in and E:02 icon will flash
on the program indicator. As long
as the problem continues, washing
program is paused and the water inlet
is checked regularly by the machine;
when the water is restored E:02 icon
will disappear after a while and the
washing program resumes.
30
USA