Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Minka Group Aire WELKIN
Summary of Contents for Minka Group Aire WELKIN
- Page 1 WELKIN READ AND SAVE ALL INSTRUCTIONS INSTRUCTION MANUAL WARRANTY CERTIFICATE...
- Page 2 © 2019 Minka Lighting, Inc. Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws. 1151 W. Bradford Court, Corona, CA 92882 For Customer Assistance Call: 1-800-307-3267...
-
Page 3: Table Of Contents
WARRANTY The Aire warranty is for one (1) year from the date of purchase from an authorized Aire dealer. This warranty is only valid to the original purchaser or user against all defects in material and workmanship (light bulbs excluded) for one (1) full year. -
Page 4: Safety Rules
SAFETY RULES 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local electrical codes. Electrical installation should be performed by a quali ed licensed electrician. -
Page 5: Package Contents
PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: A.Mounting hardware: 1. Hanger bracket 10#1x 1.5” Woody screws(2 pcs) 2. Canopy 3#d5D19 1mm Washer (2 pcs) 3. Canopy cover 8#-32 3/4”Electrical box screws (2 pcs) 4. -
Page 6: Installing The Fan
INSTALLING THE FAN Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape. MOUNTING OPTIONS If there isn't an existing mounting box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building structure. -
Page 7: Attaching The Fan Blades
ATTACHING THE FAN BLADES Attach the blades and tighten the blades with the upper motor screws and lower motor screws provided. Same procedure to assemble all 4 blades. (Figure 5) Notice 'THIS SIDE UP' label on fan blades. The blade are not reversible. (Figure 5-1) FIG.5-1 FIG.5... -
Page 8: Hanging The Fan-Standard Ceiling Mounting
HANGING THE FAN-STANDARD CEILING MOUNTING WARNING: All of the parts, hardware and components such as the hanger bracket and hanger ball have been provided for your safety and the proper installation of your new ceiling fan. The use of other parts, hardware or components not supplied by Aire with the fan will void the Aire Warranty. -
Page 9: Electrical Connections
ELECTRICAL CONNECTIONS WARNING: To avoid possible electrical shock be sure electricity is turned off at the main fuse or breaker box before wiring. NOTE. The Aire Control System for this DC motor fans is equipped with a learning frequency function which has 32 code combinations to prevent potential interference from other remote units. -
Page 10: Finishing The Installation
FINISHING THE INSTALLATION STANDARD CEILING MOUNTING Step 1. Remove 1 of the 2 screws from the bottom of the hanger bracket and loosen the other one half a turn from the screw head. Step 2. Slide the canopy up towards the hunger bracket and place the key hole on the canopy over the screw on the hanger bracket turn canopy until it locks in place at the narrow section of the key holes. - Page 11 ATTACHING THE LIGHT Step.2 Attach the 20W LED assembly to the switch box by twistitghtly.(Fig.17) Note: This is a integrated LED light lit assembly and can not be disassembled to prevent electronic shock. FIG. 17...
-
Page 12: Operating The Remote Control
OPERATING THE REMOTE CONTROL / WALL CONTROL Remote Control only: Install a A23 12 volt battery (included). To prevent damage to transmitter remove the battery if not used for long periods of time. Your DC brushless motor is equipped with a self learning frequency function remote control. Restore power to ceiling fan and test the transmitter as below for proper operation: A. - Page 13 OPERATING THE REMOTE CONTROL / WALL CONTROL Note: The auto learning function will only mandate within 60 seconds when Fig. 18 turning the fan's AC power ON. 1. Select desired frequency from the back of transmitter. 2. Press the transmitter's “Off” button, and hold the “Off” button for over 10 seconds.
- Page 14 OPERATING THE REMOTE CONTROL / WALL CONTROL WINTER OPERATION SUMMER OPERATION Fig. 19 Fig. 20 Speed settings for warm or cold weather depend on factors such as room size, ceiling height and number of fans. NOTE: to change the direction of the rotation of the blades the fan must be in operation mode. Warm Weather (forward) warmer setting without affecting your comfort.
-
Page 15: Care Of Your Fan
CARE OF YOUR FAN Here are some suggestions to help maintain your fan. 1. Because of the fan's natural movement some connections may become loose. Check the support connections, brackets and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from the ceiling). -
Page 16: Troubleshooting
TROUBLESHOOTING SYMPTOM SOLUTION Fan will not start Check to make sure the wall switch is turned on. Check circuit fuses or breakers. Caution! Make sure the power is turned off before performing the following steps. Remove canopy and check wire connections. Check wall control transmitter connections (if applicable). -
Page 17: Specifications
SPECIFICATIONS Fan Size Speed Volts Amps Watts N.W. G.W. C.F. 0.15 6.03 7.25 8.97 2.502 56” Medium 0.44 24.4 High 0.62 41.99 These are typical readings. Your actual fan may vary. They do not include amps and wattage used by the light(s). PERFORMANCE AND ENERGY INFORMATION 5,003 For any additional information about your Aire Ceiling fan, please write to:...
Need help?
Do you have a question about the Aire WELKIN and is the answer not in the manual?
Questions and answers