Samsung CL29Z30MQTXXAZ Service Manual

Color television receiver

Advertisement

Quick Links

SERVICE
COLOR TELEVISION RECEIVER
COLOR TELEVISION RECEIVER
Chassis
: KS7D(N)_Timecop
Model
: CL29Z30MQTXXAZ
Manual
CL-29Z30MQ
FEATURES
GREEN CRT
■ Turbo Voice

Advertisement

Table of Contents
loading

Summary of Contents for Samsung CL29Z30MQTXXAZ

  • Page 1 COLOR TELEVISION RECEIVER Chassis : KS7D(N)_Timecop Model : CL29Z30MQTXXAZ SERVICE Manual COLOR TELEVISION RECEIVER FEATURES GREEN CRT ■ ■ ■ Turbo Voice CL-29Z30MQ...
  • Page 2 © Samsung Electronics Co., Ltd. Jun. 2006 This Service Manual is a property of Samsung Electronics Co.,Ltd. Printed in Korea Any unauthorized use of Manual can be punished under applicable AA82-03666A International and/or domestic law.
  • Page 3: Table Of Contents

    ■ 4-1 CL29Z30MQTXXAZ ........
  • Page 4 Chapter 9 PCB Diagram ■ 9-1 Main Board ..............9-1 ■...
  • Page 5 2) Check that the Tact Switch has been pressed. 3) Check that the signal cable is properly connected. 4) Check that channel setting has been set. ■ When the picture is abnormally displayed on the screen, display the Test pattern and check the adjustment status. Samsung Electronics...
  • Page 6 When the screen is not properly displayed and the left or right side of the picture is shrunk, or the top or bottom of the screen is expanded or shrunk, check if the Deflection Blcok is out of order. Samsung Electronics...
  • Page 7 If you press the power switch of the or the channel key on the remote control when in St-BY sta- tus, the screen will be turned on. ○→◑ If the LED blinks and the screen is not displayed, check the connection between the Power and the Main Board. Samsung Electronics...
  • Page 8 (25, 43, 72Pin : 3.3V, 70Pin : 5.0V) 2. NO Video Heater Voltage Check R418, R516 Check V999S Heater 6.0~6.3 Vcc Video B+ Check (IC501 6PIN) IC501 Check : 180V~210V ICV201 Check IC301 Check IC301 Supply Voltage Check : +16.5V, -16.5V Samsung Electronics...
  • Page 9 IC602 Problem → Change ICV201 Problem → Change 4. Fly Back Lion Badness Video B+ Check (IC501 6PIN) IC501 Check : 180V~210V ICV201 Problem → Change FD801S IC804 IC801S IC601 FP801S Power cord IC901 ICT501 IC201S T401 TU01S IC301S QE01 Q401 Samsung Electronics...
  • Page 10 The RF / CTV signal is transmitted to the Tuner of the Main Board. If the signal is not received, check the following items. - Power supply: 5V, 33V - Check for RF defects: Check the IF output - Check for AUDIO defect: Check the SIF Signal output Samsung Electronics...
  • Page 11 Troubleshooting 2. Micom Diagnosis VSP/MSP/DRX Block ETC - Power supply: 3.3V, 5V, 8V - Check for input defects: Y/C(CVBS, S-VHS), 480i Y/Pb/Pr signal Samsung Electronics...
  • Page 12 The signals are sent to VCTI and the selected signals are output. If the signal input or output does not work, check the following items. - Check for input defects: Check the Micom input pin. - Check for output defects: Check JAR701 (for RF/AV) or JA701(for comp/S_VHS) Samsung Electronics...
  • Page 13 This receives the signal from the Audio Processor (VCTI) and outputs the signal in7W+7W / 10W + 10W sound. - Power supply : 14V - Check for input defects : AMP-R,AMP-L - Check for output defects : L+, L-, R+,R- Samsung Electronics...
  • Page 14 If the voltage is measured, the problem is a defect in the FBT unit. (When you don't have an oscilloscope, and you can hear the high-voltage sound, you can determine that the horizontal TR is normal.) - Is the vertical input waveform output from the VCTI VDP Pin. 6-10 Samsung Electronics...
  • Page 15 Schematic Diagram 10. Schematic Diagram 10-1 MAIN This Document can not be used without Samsung’s authorization. Power TP07 Signal TP09 TP08 TP09 TP07 TP08 Samsung Electronics 10-1...
  • Page 16 Schematic Diagram 10-2 POWER This Document can not be used without Samsung’s authorization. TP01 Power TP01 Signal TP02 TP04 TP02 TP04 TP05 TP06 TP06 TP05 10-2 Samsung Electronics...
  • Page 17 Schematic Diagram 10-3 Sound This Document can not be used without Samsung’s authorization. Samsung Electronics 10-3...
  • Page 18 Reference Information 14. Reference Information 14-1 Option Byte Samsung Electronics 14-1...
  • Page 19 Audio Multimix provides 2 languages for audio when broadcast- ing a foreign movie, drama, news, etc. You can select and lis- ten to one of the supported languages or you can select and listen to both languages simultaneously. 14-2 Samsung Electronics...
  • Page 20 - VCT4822_F1: Sound Processor, Video Processor, Display and Deflection Processor Controller, OSD and Text Processing - TDA7297SA : Sound Signal Amplify - STR-X6750F: Power Supply HIC - TDQ-6F/13F2S (Tuner): RF signal processing , output IF signal - TECCIO4OSL32A(E) : 2Tuner-PIP Main tuner - TMQH2-003A,2 Tuner-PIP Sub tuner Samsung Electronics...
  • Page 21 - Rear: 2 AV Input & Component video share 1 Component Input : 480i, RF 1 Input 1 AV Output ■ Remocon - TM85 ■ Power Supply - 100V ~ 240V, (Mexico : 120V) ■ Power Comsumption - Standy-by: Less than 2.6W - Standard Power: 140W Samsung Electronics...
  • Page 22 TM85 Remote Surf Channel Labelling Blue Screen Rack Voltage Voltage 100~240 AC120V 145W 140W Power Consumption Stand-by under 3W under 3W RF Input A/V Input S1/R2 S1/R2 Monitor Output Jacks S-VHS Input S1/R1 Headphone DVD Input PC Input(VGA) Samsung Electronics...
  • Page 23 Product Specification 2-4 Accessories Accessories Item Item code Remark Remote Control AA59-00385A AAA Alkaline Battery (2) 4301-000103 Samsung Service Owner's Instructions AA68-03805A center Safety Guide Manual AA68-03242F Warranty Card AA68-00682C Registration Card BN68-00832C Video Cable / Audio Cable S-Video Cable...
  • Page 24: Chapter 1 Precaution

    When Check the AC power cord for possible damages. Keep voltage exceeds the specified limits, check each special the part or the lead away from any heat-emitting part. materials. Samsung Electronics...
  • Page 25 Critical safety parts should be bracketed with ( Use only regular parts for replacements (in particular, flame resistance and dielectric strength specifications). Irregular parts or materials may cause electric shock or fire. Samsung Electronics...
  • Page 26: Servicing Precautions

    5. Check for insulation between the blade of the AC plug 10. The sharp edges of the metal material may cause and that of any conductive materials (i.e. the metal physical damage, so ensure wearing protective gloves panel, input terminal, earphone jack, etc). during the repair. Samsung Electronics...
  • Page 27: Static Electricity Precautions

    These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Samsung Electronics...
  • Page 28: Installation Precautions

    5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock. Samsung Electronics...
  • Page 29 MEMO Samsung Electronics...
  • Page 30: Chapter 9 Pcb Diagram

    * CNV901A : This is a 6P connected from Tact,S/W pcb for IR,LED,5V. * CN902 : This is a 4P connected from Control PCB for Key1,Key2 input signal. * CN601 : This is a 4P connected to Speaker for Sound output signal. Samsung Electronics...
  • Page 31 Connected to the CRT Ass'y PIN No. Pin Name PIN No. Pin Name TILT CN503B CN701 Connecte to the CRT Ass'y Connected to the Side AV Port PIN No. Pin Name PIN No. Pin Name -16.5V +16.5V HEATER 200V Samsung Electronics...
  • Page 32: Crt Board

    This supplies the final R/G/B signal from the Main Board and the CRT deflection signal to the CRT. 9-2-2 Names & Roles of Key Parts * CN503 : This is a 14P connected from MAIN PCB for R/G/B/AKB/HEATER/B+200V. * GT501,GT502 : This is a 2P connected to TBC-WIRE. Samsung Electronics...
  • Page 33 PCB Diagram 9-2-3 CRT Board Connector Pin CN503 Connects the R/G/B signal and power for the CRT and AMP from the Main Board. PIN No. Pin NAME TILT -16.5 +16.5 Heater +200V Samsung Electronics...
  • Page 34: Chapter 11 Operation Instruction & Installation

    ENTER button on the remote control. features. + VOL – Press to increase or decrease the volume. In the on-screen menu, use the + VOL – button as you would use the œ œ and √ √ button on the remote control. Samsung Electronics 11-1...
  • Page 35 Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. S-VIDEO Video inputs for external devices with an S-Video output. AV IN 2 Video and audio inputs for external devices. 11-2 Samsung Electronics...
  • Page 36 DVD or DTV set-top box. 480i video signal input is available. AV OUT Connect to the audio/video input jacks of a recording ANT IN VCR. Connect to an antenna or cable TV system. Samsung Electronics 11-3...
  • Page 37 You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 11-4 Samsung Electronics...
  • Page 38 Exploded View & Part List 4. Exploded View & Part List 4-1 CL29Z30MQTXXAZ You can search for the updated part code through ITSELF web site. URL:http://itself.sec.samsung.co.kr Loc.No. Code No. Description Specification Q'ty SA/SNA Remark CIS3 BP64-00331B DECORATION-POWER PJTV,ABS,HB,GR503,SVM30 S.N.A CIS7...
  • Page 39 Electrical Part List 5. Electrical Part List 5-1 CL29Z30MQTXXAZ You can search for the updated part code through ITSELF web site. URL:http://itself.sec.samsung.co.kr Loc.No. Code No. Description Specification Q'ty SA/SNA Remark ASSY CHASSIS M0017 AA91-09859B ASSY CHASSIS CL29Z30MQTXXAZ,KS7D,TIMECOP S.N.A T0105 AA94-15237A...
  • Page 40 CN909 AA37-00001A CONNECTOR-FBT FIX PIN JM-3500,CPTTV,0.36 CR402S 2306-000330 C-FILM,LEAD-PPF 7.7NF,3%,1.6KV,BK,28.5X1 CR403S 2306-000327 C-FILM,LEAD-PPF 6.3nF,3%,1.6KV,TP,28.5x1 CR404S 2301-001065 C-FILM,LEAD-PPF 47nF,5%,630V,TP,19x15.5x CR406S 2301-001091 C-FILM,LEAD-PPF 470nF,5%,400V,BK,26x21.5 CT501 2401-000832 C-AL 220uF,20%,25V,GP,TP,8x11.5,5 CT502 2401-000832 C-AL 220uF,20%,25V,GP,TP,8x11.5,5 CT503 2305-000665 C-FILM,LEAD-PEF 100nF,5%,63V,TP,7.5x4.0x CV101 2306-000122 C-FILM,LEAD-PPF 100nF,5%,50V,TP,7.3x4.0x Samsung Electronics...
  • Page 41 C-CERAMIC,MLC-AXIAL 100nF,80-20%,50V,Y5V CV915 2202-000121 C-CERAMIC,MLC-AXIAL 0.1nF,10%,50V,Y5P,-, CV918 2401-003578 C-AL 1000uF,20%,10V,GP,TP,8x20mm,5 CV920 2202-000863 C-CERAMIC,MLC-AXIAL 560pF,10%,50V,Y5P,TP CV933 2305-000411 C-FILM,LEAD-PEF 470nF,5%,50V,TP,7.3x4.8x CV934 2305-000411 C-FILM,LEAD-PEF 470nF,5%,50V,TP,7.3x4.8x CV935 2305-000411 C-FILM,LEAD-PEF 470nF,5%,50V,TP,7.3x4.8x CX801S 2306-000321 C-FILM,LEAD-PPF 470NF,20%,275V,BK,31X11X CY801S 2201-000963 C-CERAMIC,DISC 1NF,20%,400V,Y5U,TP,9.5X6 CY802S 2201-000987 C-CERAMIC,DISC 2.2NF,20%,400V,Y5U,BK,12. Samsung Electronics...
  • Page 42 EL404 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H S.N.A EL407 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H S.N.A EL408 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H S.N.A EL801 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H S.N.A EL802 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H S.N.A EL803 6042-000001 EYELET ID2.2,OD2.7,L3.1,NI+SN,BSP3-1/2H S.N.A EY401 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY402 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H Samsung Electronics...
  • Page 43 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY830 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY831 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY832 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY833 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY834 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY835 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY836 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY837 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H EY838 6042-000002 EYELET ID1.5,OD2,L2.8,NI+SN,BSP3-1/2H Samsung Electronics...
  • Page 44 INDUCTOR-AXIAL 1UH,10%,2534 LV702 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 LV703 2701-000142 INDUCTOR-AXIAL 1UH,10%,2534 LV704 2701-000168 INDUCTOR-AXIAL 3.3UH,5%,2534 LV705 2701-000168 INDUCTOR-AXIAL 3.3UH,5%,2534 LV901 2701-000143 INDUCTOR-AXIAL 1UH,10%,3070 LV902 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM LV903 2001-000281 R-CARBON 100OHM,5%,1/8W,AA,TP,1.8X3.2MM LV904 2701-000116 INDUCTOR-AXIAL 10UH,10%,4298 LV905 2701-000158 INDUCTOR-AXIAL 22UH,10%,2534 Samsung Electronics...
  • Page 45 Electrical Part List Loc.No. Code No. Description Specification Q'ty SA/SNA Remark LX801S AA29-00011A FILTER LINE NOISE CZ32W8,-,0.20MAX,1.5KV M0014 AA97-16528B ASSY AUTO-MAIN CL29Z30MQTXXAZ,KS7D,TIME S.N.A M0018 AA97-16687A ASSY MICOM T-TIMNKU-1702,KS7D,20060512,A S.N.A M0020 AA96-04061A ASSY BOARD P CL29Z30MQ,S-AMERICA S.N.A M0081 6003-000335 SCREW-TAPTITE RH,+,2S,M3,L8,ZPC(YEL),SWR S.N.A...
  • Page 46 R-CARBON 1.2KOHM,5%,1/8W,AA,TP,1.8X3.2MM RV206 2001-000878 R-CARBON 6.2KOHM,5%,1/8W,AA,TP,1.8X3.2MM RV207 2001-000020 R-CARBON(S) 22OHM,5%,1/2W,AA,TP,2.4X6.4M RV208 2001-000362 R-CARBON 150OHM,5%,1/8W,AA,TP,1.8X3.2MM RV209 2001-000362 R-CARBON 150OHM,5%,1/8W,AA,TP,1.8X3.2MM RV210 2001-000362 R-CARBON 150OHM,5%,1/8W,AA,TP,1.8X3.2MM RV212 2001-000780 R-CARBON 470OHM,5%,1/8W,AA,TP,1.8X3.2MM RV213 2001-000666 R-CARBON 33OHM,5%,1/8W,AA,TP,1.8X3.2MM RV214 2001-000780 R-CARBON 470OHM,5%,1/8W,AA,TP,1.8X3.2MM RV215 2001-000666 R-CARBON 33OHM,5%,1/8W,AA,TP,1.8X3.2MM Samsung Electronics...
  • Page 47 S.N.A T0175 AA62-00057B HEAT SINK-PS CT-29K12P,A1050S,1.0,41,60, S.N.A T0175 AA62-00057A HEAT SINK-PS -,-,T1.0,-,41*20*60,D2,-,-, S.N.A T0245 0202-001522 SOLDER-WIRE FLUX LFA3-107,-,D1.2,96.5Sn/ 0.025 S.N.A T0296 AA27-00035B COIL LINEARITY 30uH,DR15x18,11.0mm,19x45 T0900 1404-001045 THERMISTOR-NTC 4.7ohm,4.565A,2900K,-,-,- T401 AA26-50001M TRANS-H.DRIVE -,-,-,80mH,-,-,520uH,-,-,- T444 AA26-00266A TRANS FBT FUH29A001V,CORSET2,3.50mH,PM5 Samsung Electronics...
  • Page 48 S.N.A T0245 AA39-20010D LEAD CONNECTOR-ASSY ,1P,400,YFH800-01,S, T0245 0202-001522 SOLDER-WIRE FLUX LFA3-107,-,D1.2,96.5Sn/ 0.003 S.N.A T0310 4715-000001 SURGE ABSORBER 1000V,+50-10%,-,-,- T0310 4715-000001 SURGE ABSORBER 1000V,+50-10%,-,-,- T0310 4715-000001 SURGE ABSORBER 1000V,+50-10%,-,-,- T0310 4715-000001 SURGE ABSORBER 1000V,+50-10%,-,-,- V999S 3704-001197 SOCKET-CRT 8P+SEN,29PI,22.5PI,NI+SN,- 5-10 Samsung Electronics...
  • Page 49 Electrical Part List Loc.No. Code No. Description Specification Q'ty SA/SNA Remark ASSY FIXING T0892 AA91-09860B ASSY FIXING CL29Z30MQTXXAZ,KS7D,TIMECOP S.N.A M0081 6003-001023 SCREW-TAPTITE PWH,+,B,M3,L10,ZPC(YEL),SW S.N.A M2893 AA39-20010B LEAD CONNECTOR ,1P,500,YFH800-01,S,1617# T0070 AA61-01424A HOLDER-CHASSIS 32Z30,HIPS V0,T2.0,G4309, S.N.A T0130 AA96-03803C ASSY COVER P-TERMINAL BOARD 29Z30,SEM,HI S.N.A...
  • Page 50 T0527 AA65-00056A CLAMPER CORE-WIRE 32Z30,NYLON-66,V0,NTR S.N.A T0527 AA65-00061A CLAMPER CORE-D,COIL NYLON-66,VO,NTR S.N.A T0603 AA96-04062A ASSY TBC WIRE P K64A,29,NTSC,2P S.N.A M0909 AA72-00030A SPONGE 29Z30,CR VO BLK,T2.0,10,540 S.N.A T0089 AA27-00359A COIL DEGAUSSING CORSET,9.45mH,130Turns,4 T0063 AA03-00486A CRT COLOR A68QFZ893X101,0,1.10,13.3,1.33 5-12 Samsung Electronics...
  • Page 51: Chapter 12 Disassembly & Reassembly

    ② Tap the upper part of the Back Cover 2 or 3 times and pull the Back Cover to separate it from the unit. : Disassemble the product after disconnecting the power cord and discharge the unit to prevent an electric shock and damage to the product due to static electricity. Samsung Electronics 12-1...
  • Page 52 ① Separate the Side AV Wire from the Front Cabinet and the Main Board. ② Pull Holder Chassis like the picture arrowdirection. ① Separate the Control 4P Wire,6P Wire,Speaker Wire from the Front Cabinet and the Main Board. 12-2 Samsung Electronics...
  • Page 53 Disassembly & Reassembly Part Name Description Description Photo Chassis ① Separate the Power cord,D-COIL,TILT,DY connector from Holder Main Board ① Remove the screw. Samsung Electronics 12-3...
  • Page 54 : Take care when separating the wires because pulling the wires by force may damage the socket. In addition, separate the wires on a flat and clean surface so as to prevent scratching of the material and the PCB. 12-4 Samsung Electronics...
  • Page 55 Disassembly & Reassembly 12-1-4 Disassembling the Main Board Part Name Description Description Photo Main Board ① Separate the cable from the Main Board. ① Separate the cable from the Main Board. Samsung Electronics 12-5...
  • Page 56 MEMO 12-6 Samsung Electronics...
  • Page 57 COLOR TELEVISION RECEIVER Chassis : KS7D(N)_Timecop Model : CL29Z30MQTXXAZ SERVICE Manual COLOR TELEVISION RECEIVER FEATURES GREEN CRT ■ ■ ■ Turbo Voice CL-29Z30MQ...
  • Page 58 © Samsung Electronics Co., Ltd. Jun. 2006 This Service Manual is a property of Samsung Electronics Co.,Ltd. Printed in Korea Any unauthorized use of Manual can be punished under applicable AA82-03666A International and/or domestic law.
  • Page 59: Key Features

    ■ 4-1 CL29Z30MQTXXAZ ........
  • Page 60 Chapter 9 PCB Diagram ■ 9-1 Main Board ..............9-1 ■...
  • Page 61: Chapter 13 Circuit Description

    * Micom Block consists of five aspects as: Video & Sound IF Processor,Sound Processor, Video Processor, Display and Deflection Processor and Controller, OSD,Text Processing. * TDQ-6F/13F2S (Tuner): RF signal processing, output IF signal. Samsung Electronics 13-1...
  • Page 62 * EEPROM: As a extended ROM of TVT. It contains some data which is used to program executing. * STR W6750F: SMPS control HIC. Provide switching signal in order to control the trans working. * TDQ-6F/13F2S(TUNER): Receives the RF signal and output a fixed IF to Micom. 13-2 Samsung Electronics...
  • Page 63 B+5V IC802(78R05) IC802(78R05) 130V 130V B+5V B+5V ± 16.5V ± 16.5V Vertical AMP Vertical AMP B+33V B+33V TUNER TUNER Q813(KSC2331-Y) Q813(KSC2331 - Y) B+8V B+8V B+210V B+210V Video AMP Video AMP SCREEN SCREEN FOCUS FOCUS HEATER HEATER Samsung Electronics 13-3...
  • Page 64 Vertical DEF. LA78045,SANYO Horizontal DEF. 2SC5936M,MATSUSHITA SOUND AMP TDA7297SA, SGS-TOMSON 10W+10W SOUND AMP TDA7266SA, SGS-TOMSON 7W+7W EEPROM 24C161,SAMSUNG VIDEO AMP TDA6109JF, Philips Regulator 78R05 B+5V Regulator Regulator 78RM33 A+3.3V Regulator Regulator KSC2328A-Y A+5V Regulator Regulator KSC2331-Y B+3.3V Regulator 13-4 Samsung Electronics...
  • Page 65 Block Diagram 7. Block Diagram 7-1 Overall Block Diagram i t p ) l a l a t i t c o i t o i t i t c Samsung Electronics...
  • Page 66 Block Diagram 7-2 Partial Block Diagram 7-2-1 System Board Block Diagram Samsung Electronics...
  • Page 67: Chapter 3 Alignment & Adjustment

    2. When replacing the Main Board : Focus adjustment, screen voltage setting and W/B adjustment are all required. 3. When replacing the CRT Ass'y : No adjustments required. 4. When replacing the Side AV : No adjustments required. Samsung Electronics...
  • Page 68: How To Access Service Mode

    TEST PATTERN EEPROM BUS STOP CHCKSUM RESET G2 ADJUST 3. Functions of the Keys within Service Mode MENU Show all menus Move the cursor to select an item. ▲ / ▼ Adjust the selected configuration value ◀ / ▶ Samsung Electronics...
  • Page 69 CL-29Z30MQ V Amp V Shift H EW H Shift V Linearity V SC H Parabola Upper Corner Lower Corner Upper Corner6 Lower Corner6 H Trapezium Angle EHT Time EHT Threshold EHT Vertical EHT Horizontal EHT Vertical2 EHT Horizontal2 Samsung Electronics...
  • Page 70 CL-29Z30MQ V Amp V Shift H EW H Shift V Linearity V SC H Parabola Upper Corner Lower Corner Upper Corner6 Lower Corner6 H Trapezium Angle EHT Time EHT Threshold EHT Vertical EHT Horizontal EHT Vertical2 EHT Horizontal2 Samsung Electronics...
  • Page 71 Alignment & Adjustment 0 V-AMP H-Parabola 1 V-Shift Upper Coner 2 H EW Low Coner 3 H-Shift H-Trapezium 4 V-Linearity 10 BOW 5 V SC 11 Angle Samsung Electronics...
  • Page 72 CL-29Z30MQ R Cutoff G Cutoff B Cutoff R Drive G Drive B Drive Sub Bright Sub Contrast Sub Color Sub Tint AKB Option BCL Threshold BCL Gain BCL Time Sub Sharpness Pilot Low Pilot High V-Mute(x100ms) BCL TCUP Samsung Electronics...
  • Page 73 Item Remark CL-29Z30PQ CL-29Z30MQ Melody Volume HB Start HB Stop RF AGC VM Gain VM Delay V Peaking BLE Tilt BLE Gain BLE Mode BLE Break CTI Gain CTI Coring LTI Gain D-EHT Time DCT Ratio VSP COMB Samsung Electronics...
  • Page 74 PIP NTSC V.Pos PIP H.Pos PIP R Cutoff PIP B Cutoff PIP R Drive PIP B Drive 6. YC Delay 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ PAL Delay SECAM Delay NTSC Delay PAL(AV) Delay SECAM(AV) Delay NTSC(AV) Delay Samsung Electronics...
  • Page 75 Alignment & Adjustment 7. Test Pattern 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ G2 Adjust Read Cut Read Drive IBRM WDRM COLR G B 50 / 50 / 50 50 / 50 / 50 Samsung Electronics...
  • Page 76 TTX V Position TTX H Position TTX Contrast TTX Brightness OSD Contrast OSD Brightness Double TTX H Position Standard Equ100(Std BASS) Standard Equ300(Std TREBLE) Standard Equ1K(Music BASS) Standard Equ3K(Music TREBLE) Standard 10K(Movie BASS) Music Equ100(Movie TREBLE) Music Equ300(Speech BASS) 3-10 Samsung Electronics...
  • Page 77 PIP G CUTOFF PIP G DRIVE OSD/PIP BRIGHT BALANCE PIP BRIGHT OFFSET MDB_STRENGTH MDB_HARMONIC MDB_HP MDB_LP MDB_LIM MDB_CUTOFF EHT POSITION 1 EHT POSITION 2 3.4CH SLLTHD (TV-NO NOISE) CH SLLTHD (TV-NO NOISE) LNA Operating Point SLLTHDV(TV NO NOISE) Samsung Electronics 3-11...
  • Page 78 Remark CL-29Z30PQ CL-29Z30MQ LNA Default LNA SWITCH LMIXOFS H-OUTDEL CR-P Initial CR-I Initial DRX_CR_AMP_TH Over Modulation Return Counter VCR Mode Counter "VID_AMP_HEAD_BS(In the modula- tion)" CR_P (In the Over Modulation) "THRSEL(picture shaking when weak signal)" SLLTHDVP EEP_BC_MIN_LIMIT 3-12 Samsung Electronics...
  • Page 79 2RCA+S+DVD 2RCA+S+DVD Tilt Vchip Caption 2-Tuner Auto On StandBy LED Philippines(AV MULTI) Osd Language English English FM Radio Antenna Disp Hi-Deviation Plug & Play DNIe Jr Volume Curve Small Small Color Matrix Japan Japan PWM/Parabola Parabola Parabola Samsung Electronics 3-13...
  • Page 80 Alignment & Adjustment 11. White Balance 29" SLIM 29" SLIM Item Remark CL-29Z30PQ CL-29Z30MQ 269± 3/274± 3/40± 0.3 269± 3/274± 3/40± 0.3 269± 3/274± 3/2.0± 0.2 269± 3/274± 3/2.0± 0.2 3-14 Samsung Electronics...
  • Page 81: Service Adjustment

    ② Press "Power Off → Mute → 1 → 8 → 2 → Power On" using the remote control and enter Factory Mode. ③ Enter Deflection Mode. ④ Adjust the V-AMP, V-SHIFT, H-AMP and H-SHIFT items so that the width becomes 5 and the height becomes 4. Samsung Electronics 3-15...
  • Page 82 Upper Coner 4 V-Linearity Low Coner 5 V SC ⑦ When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed. If there is no change, finish the adjustments. 3-16 Samsung Electronics...
  • Page 83: Replacements & Calibration

    3-5-1 Adjusting the Focus 1. Display the Cross Hatch pattern. 2. Turn the Focus clockwise to the optimal position. 3. Slowly turn the Focus clockwise so that the cross line is the most clearly displayed. After Adjustment Focus Samsung Electronics 3-17...
  • Page 84 1. Select "Power Off → Mute → 1 → 8 → 2 → Power On" to enter Service Mode. 2. Display the Toshiba pattern. Screen 3. Use remocon come into "G2 Adjust" mode by hand. 4. Turn Screen VR of FBT and confirm the characters below changed from RED to GREEN. 3-18 Samsung Electronics...
  • Page 85 4. When the adjustment is finished, check the following checklist. - If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again. - If there is a ghost line on the screen, adjust the Screen Voltage again. Samsung Electronics 3-19...
  • Page 86 MEMO 3-20 Samsung Electronics...
  • Page 87: Chapter 8 Wiring Diagram

    Wiring Diagram 8. Wiring Diagram 8-1 Overall Wiring Samsung Electronics...
  • Page 88: Pin Connection

    Wiring Diagram 8-2 Pin Connection Samsung Electronics...

Table of Contents