Setup - Oktava Мк-012 Operation Manual

SETUP

MICROPHONE INSTALLATION INTO CLIP
1. Screw the microphone clip onto robust, stable stand (Fig. 1).
2. Draw the clip clamps apart and insert the microphone (Fig. 2).
3. In order to rotate the microphone, use the screw on the clip (Fig. 3).
Fig. 1
MICROPHONE INSTALLATION INTO SHOCK MOUNT
1. Screw the microphone shock mount AM-20 (Oktava) onto
robust, stable stand (Fig. 4).
2. Insert the microphone on the side of the shock mount inner ring
(Fig. 5).
3. In order to rotate the microphone, use the nut and the wing
screw (Fig. 6).
8
Fig. 2 Fig. 3