Using Headphones; Care And Maintenance; Technical Specification - JVC RA-E321B Instruction Manual

USING THE RADIO
• Turn the volume control – on/off knob (6) upward to switch the radio on.
• Set the waveband selector (5) to the required waveband.
• Turn the tuning control knob (3) to select the frequency and station of choice. The radio
frequency scale will show the waveband selected.
• Adjust the volume to the desired level by rotating the volume control knob (6).
• To turn off the radio, turn the volume control – on/off knob (6) downward until a "click"
sound is heard.
Note: The built-in AM and the external FM antennas are directional. If tuning into a FM station extend
or move the antenna (2) for a better reception. If tuning into an AM station rotate the whole unit after
tuning to obtain the best reception.

USING HEADPHONES

A headphone jack has been provided so that the set can be used without disturbing others.
Plug in the 3,5 mm headphones at the point marked
lowest setting before adjusting the volume up to your chosen level. Excessive sound
pressure from earphones and headphones can cause hearing loss. The speaker will not
operate when headphones are fitted.
Note: Headphones are not included.

CARE AND MAINTENANCE

Wipe external surfaces with a soft cloth. If the casing is very dirty, unplug from the mains
supply and use a damp cloth soaked in a weak solution of washing up liquid and water.
Allow to dry thoroughly before reusing.

TECHNICAL SPECIFICATION

Power source
Radio frequency
Power consumption
Standby power consumption
Power output
We reserve the right to change technical specifications.
. Turn the listening volume to the
AC 230V~ 50Hz
4 x 1,5V; Battery size "C"/UM-2/LR14 (not included)
FM 87,5 – 108 MHz, AM 522 – 1620 kHz
5 W
0,5 W
1 x 0,45 Watts RMS
EN