Advertisement
stream to be adjusted. Once a stream has been highlighted, pressing the Select button displays the text
Lock
next to the stream and prevents the stream from being accessible during any of the tuning modes.
Locked streams can be accessed only by direct stream number entry, at which time the user will be
prompted to enter the previously stored 4-digit code. Once the correct code has been entered, the audio
begins to play. The stream returns to the locked status if the stream is changed or the vehicle/unit is
turned off (or by returning to this menu and going through the same process to return the stream to the
list). Upon adding a stream, the text
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The
default lock code is
code perform the following procedure:
1. Press the MENU button to access the User Menu.
2. Press the Channel up/down button to select the
"Lock Options"
3. Press the Select button.
4. Press the Channel up/down button to highlight
5. Press the Select button.
6. Enter the default code
7. The
New Code
buttons. You will then be prompted to confirm the new code by entering your code again.
8. The lock code is now changed.
Edit Code
Upon entering this mode, the user is prompted to enter the current four digit numerical code being
used to lock/unlock stream access. Once the correct code has been entered, the user is prompted to
enter the new 4-digit code twice. The second entry is requested for confirmation.
Audio Level Options
Upon entering this mode, a 10 segment horizontal bar graph is displayed with a
and a
+
sign to the right. The current setting is indicated on the bar graph. Pressing the Channel
up/down button will adjust the bar graph audio level indication and audio gain, accordingly. To select and
exit this function, press the Select button. No button activity for 10 seconds will also exit this function.
Antenna Aiming (Home Installation)
Upon entering this mode, two 10 segment horizontal bar graphs are displayed with a
left and a
+
sign to the right. The satellite signal strength is displayed by the SAT graph. The
terrestrial signal strength is displayed by the TER graph. Position the antenna to optimize either the
satellite or terrestrial signal. The current setting is indicated on the bar graph. Moving the antenna
location adjusts the bar graphs signal strength, represented by the filled-in bar graph squares, thus
ensuring optimum reception. To exit this function, press the Select Button.
NOTE: Terrestrial repeaters are typically used in large urban areas where structures may affect the
line of sight satellite signal. Terrestrial signals (TER) may not be available in your geographic
location.
Memory Options
In this mode, the user can turn the Memory Search Function (S-Seek) ON or OFF. In addition, all 20
Memory Locations can be cleared. On the display, the top line displays the text, Memory Options.
Lock
is removed from alongside the stream number/name.
0000 . This code can be maintained or changed. To change the default lock
0000 .
prompt will appear. Enter your newfour digit code using the 0-9 number
Edit Code .
11
-
sign to the left
-
sign to the
Advertisement
