System Connections - Sharp XL-S15H Operation Manual

System connections

XL-S15H
FM aerial
AM loop aerial
Right speaker
Wall socket
(AC 230 - 240 V, 50 Hz)
Right speaker Left speaker
8
Make sure to unplug the AC power lead before making any connections.
" Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Left speaker
Notes:
! Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
! Do not connect the attached FM aerial to an external FM aerial.
Otherwise, trouble may occur.
Installing the AM loop aerial:
< Assembling >
" Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
! Do not let the bare speaker wires touch
each other.
! Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can dam-
White line
age the unit.
Black
! Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
Placing the speaker system:
There is no distinction between the right and the left speakers.
04/3/31 XL-S15H_E_1.fm
< Attaching to the wall >
Wall Screws (not supplied)
Incorrect
TINSEA028SJZZ