MacDon FlexDraper FD2 Series Installation Instructions Manual page 56
Header for combines with flex-float technology, steel finger kits 311054, 311055, 311068, and 311069
Hide thumbs
Also See for FlexDraper FD2 Series:
- Manual (560 pages) ,
- Installation instructions manual (22 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Figure 5.40: Five-Bat Reel – Rubber Paddles
2. If removed, install three RUBBER reel end paddles (A) on the OUTBOARD FACE of the endshield assembly using two
M8 X 1.25 X 20 hex bolts (B) and nuts (C) per paddle.
IMPORTANT:
The arrow points to the front of the machine. Ensure the rubber paddles are oriented as shown. The rubber paddles
on both ends of the reel (the outboard cam and outboard tail ends) should be aligned.
215505
INSTALLATION INSTRUCTIONS
50
Revision A
Advertisement
Table of Contents
