Stryker SmartPump Rx Instructions For Use Manual page 46

6 Service Code Summary
WARNING: DO NOT service this equipment. If you require service,
contact your Stryker sales representative or call Stryker customer service
at 1-800-253-3210. Failure to comply may result in user/patient injury.
Service Alarms
CALIBRATION ERROR
REAL-TIME CLOCK STOPPED
SERIAL INTERFACE ERROR
FP NONVOLATILE MEMORY ERROR
FP FILES CORRUPT
A NONVOLATILE MEMORY ERROR
B NONVOLATILE MEMORY ERROR
HARDWARE FAULT
POWER SUPPLY FAULT
BLADDER 1 LEAK
BLADDER 2 LEAK
VALVE OR AIR PUMP FAULT
Service Code Summary
Code Description
30 Calibration test detects error.
31 Real-time clock has failed or stopped.
32 Serial interface fault.
33 The nonvolatile memory for the FP processor has
failed a memory test.
34 The nonvolatile memory storing the FP code has
failed a memory test.
35 The nonvolatile memory for the A code has failed a
memory test.
36 The nonvolatile memory for the B code has failed a
memory test.
37 An internal hardware fault was detected.
38 Internal power supply circuit fault was detected.
40 Bladder 1 leaks or is not operating correctly.
41 Bladder 2 leaks or is not operating correctly.
42 Fault detected with the operation of the air valves or
the air pump.
46