Sealey AP5MB Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
9
Only use on firm, level, unobstructed surfaces which are capable of supporting the trolley.
8
DO NOT overload.
9
Apply the brakes when stationary.
8
DO NOT stand/ride on the trolley, or allow others to do so.
9
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
‰
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Heavy-duty garage and workshop trolley ideal for a wide range of applications. Features include perforated pegboards on either side of the unit,
a lockable gas sprung top lid and twenty tool storage holes inside the top compartment which allow long tools with a shaft length of up to 700mm
to be stored. Five deep lined, 45kg capacity drawers with ball bearing slides. An internal latch mechanism allows the drawers to be locked/
unlocked from within the top compartment. The large upper compartment allows for larger tools to be stored safely, along with a lower shelf
giving unobstructed access to tools/parts. Heavy-duty side handle with rubberised grip plus two fixed and two quick release lockable alloy castor
wheels for controlled manoeuvrability and added style. Supplied with two keys.
3. SPECIFICATION
Model No:................................................... AP5MB/AP5MHV
Overall Size: (W x D x H) .................... 1090 x 650 x 1075mm
Medium Drawer (x3): (W x D x H) .............840 x 555 x 80mm
Large Drawer (x2): (W x D x H)...............840 x 555 x 170mm
Top Compartment: (W x D x H) ...............770 x 560 x 165mm
Capacity: ............................................................45kg/Drawer
4. ASSEMBLY
Attach handle to trolley with fixings supplied.
4.1.
Position as shown in fig.1
© Jack Sealey Limited
INSTRUCTIONS FOR
MOBILE TOOL TROLLEY 5 DRAWER HEAVY-
DUTY IN BLACK OR HI-VIS GREEN
AP5MB, AP5MHV
MODEL NO:
fig.1
Original Language Version
AP5MB, AP5MHV | Issue 1 29/03/17