TP-Link Archer VR600 Quick Installation Manual

Quick Installation Guide
AC1600 Wireless Gigabit VDSL/ADSL
Modem Router
VR600
2.Configure the Modem Router
Before You Start
1. You'll usually need an internet service username and password,
given to you by your internet service provider (ISP) when you first
signed up with them. If you are unsure, please check with your ISP.
2. Find the Wi-Fi Info Card included in the product packaging. Printed
on the card are your router's default SSIDs (network names) and
wireless password.
1.Connect the Hardware
Phone Jack
1
Attach the
antennas.
Phone Cable
2
Modem Router
DSL
DSL Splitter
PHONE MODEM
Phone Cable
If you don't need the phone service, just directly
connect the modem router to the phone jack
with the provided phone cable, then follow steps
4 and 5 to complete the hardware connection.
Phone (Optional)
Method 1: Via Web Browser
1. Connect your device to the router using an Ethernet cable or wirelessly.
SSIDs (network names) and Wireless Password are on the Wi-Fi Info Card.
DSL USB1 LAN2 LAN3 LAN4/WAN Power
Ethernet Cable
2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a password and get started.
Note: If the login page does not appear, please refer to FAQ > Q1.
http://tplinkmodem.net
New Password
Low Middle High
Confirm Password
Let's Get Started
3. Follow the step-by-step instructions to set up an internet connection
and register the TP-Link Cloud service.
Now you can enjoy your internet.
USB LAN2 LAN3 LAN4/WAN Power
4
3 Push in to turn on
the modem router.
Method 2: Via TP-Link Tether App
1. Download the TP-Link Tether app.
2. Connect your smartphone to the router.
SSIDs (network names) and Wireless Password are on the Wi-Fi Info Card.
3. Launch the Tether app and select Archer VR600.
Local Device
Archer VR600
50-C7-BF-02-EA-DC
4. Follow the steps to connect to the internet and register the
TP-Link Cloud service.
Now you can enjoy your internet.
Power Adapter
5
Verify that the following LEDs turn
stable before continuing with the
configuration.
Power On DSL On
Note: The DSL LED takes about 1 to 2
minutes to stabilize.
or
Scan to download
Device