Table of Contents
Advertisement
Chapter 2 Preparations
1.12.3
Installing PCI board
Install a PCI board to a PCI slot in the following procedure.
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Confirm the installation position with the reference to the table in Chapter 2 (1.12.2 Supported boards and
available slots).
3.
Push the retention to unlock the PCI board from PCI slot. Bring down the lever toward rear of the server,
and remove the blank cover.
Important
When installing a PCI board, make sure the connector of the board fits the
connector of the slot.
Note
If the battery for RAID controller is installed, refer to Chapter 2 (1.11 Battery for
RAID Controller).
1
Note
Keep the removed blank cover for future use.
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
2
89
Advertisement
Table of Contents
