Adding Z-Wave Devices (Via Mobile App) - Trane ComfortLink II XL1050 Manual

Adding Z-Wave Devices (via mobile app)

Alternatively, your XL1050 allows you to add
Z-Wave devices using the Nexia app on your
mobile device.
Adding Z-Wave Devices
1. Start the Nexia app.
2. Press the menu button in the top left corner.
3. At the bottom of this slide out menu, press
Connect New Device.
page 28
4. Select Z-Wave Device.
5. When prompted, prepare the device to be
added to the Z-Wave network by following
the device manufacturer's instructions to
put device into add mode. You will have
four minutes to complete this process.
XL1050 User Guide