Selecting A Sim Card; Firmware Updates - JAGER PRO M.I.N.E Operation Manual

When selecting a SIM Card to use for your M.I.N.E.
use one supplied by your corporate organisation or purchase a pre-paid SIM. We personally utilise the
Pre-Paid Telstra SIM when undertaking trapping campaigns as we have found they offer the greatest
mobile coverage. Regardless of the type of SIM chosen it is important to ensure that it has been
activated to have both Phone and Data Capabilities, as without both capabilities the camera will
not operate as designed.
NOTE: During activation of a Telstra Pre-paid SIM the default option is for a Data Only SIM, this will need
to be changed to Phone and Data SIM.
NOTE: As an Optus SIM can only be used on the Premium Service and NOT MMS transmission.
If you experience issues or have further questions regarding the selection of a SIM, please view our
FAQ's for further information.
You should periodically check the FeralTech website for firmware updates for your camera. JAGER
PRO periodically release firmware updates with new features and/or performance enhancements.
TM
Updating firmware on the M.I.N.E.
effort to ensure your camera is performing at the highest level possible.
If using the Wireless Portal update the camera firmware if your camera's firmware is not the latest version
using the Wireless Portal:
a) On the portal, select MY Cameras > FIRMWARE UPDATE
b) Compare the date of the firmware version listed for your camera to the date of the latest
version.
c) If the latest version is more recent than the one on your camera, click Update.
d) Take and send another manual photo. After the screen says the photo has been sent, it will
indicate that it is downloading and updating the FW.
If you are not using the Wireless Portal update the camera firmware using a SD Card.
a) Ensure your camera does not have low battery.
b) Make sure to start with an empty SD Card or clean off your photos first.
c) With an SD card in the camera, switch to Setup.
d) Format the SD Card
a.
b.
c.
d.
e) Apply the Firmware Update using the FW Update option in the menu.
a.

SELECTING A SIM CARD

FIRMWARE UPDATES

or I.C.E.
TM
Check the card has been formatted.
Turn camera off and remove SD Card and place in computers SD card reader
Copy the .bin file that you downloaded onto the SD Card. This is normally called
"FWS100.bin".
Place the SD Card back into the camera
Press the Menu button and navigate to the System Menu
or I.C.E. camera we recommend that you either
TM TM
Series cameras takes a few seconds and is well worth the
TM
25