Table of Contents
Advertisement
9 Frequently
asked
questions
My Bluetooth earpieces do not turn on.
The battery level is low. Charge the
earpieces.
I cannot pair my Bluetooth earpieces
with my Bluetooth device.
The Bluetooth is disabled. Enable the
Bluetooth feature on your Bluetooth
device and turn on the Bluetooth device
before you turn on the earpieces.
Pairing does not work.
•
Put both earpieces into charging
case.
•
Make sure you have disabled the
Bluetooth function of any previously
connected Bluetooth devices.
•
On your Bluetooth device, delete
"Philips TAA8606" from the
Blue tooth list.
•
Pair your earpieces (see 'Pair the
earpieces with your Bluetooth
device for the rst time' on page 6).
The Bluetooth device cannot nd the
earpieces.
•
The earpieces may be connected to
a previously paired device. Turn o
the connected device or move it out
of range.
•
Pairing may have been reset or the
earpieces have been previously
paired with another device. Pair the
earpieces with the Bluetoot device
again as described in the user
manual. (see 'Pair the earpieces
with your Bluetooth device for the
rst time' on page 6).
My Bluetooth earpieces are connected
to a Bluetooth stereo enabled mobile
phone, but music only plays on the
mobile phone speaker.
Refer to the user manual of your mobile
phone. Select to listen to music through
the earpieces.
The audio quality is poor and a crackling
noise can be heard
•
The Bluetooth device is out of range.
Reduce the distance between your
earpieces and Bluetooth device, or
remove obstacles between them.
•
Charge your earpieces.
The audio quality is poor when stream-
ing from a mobile phone is very slow or
streaming does not work at all.
Make sure your mobile phone not only
supports (mono) HSP/HFP but also
supports A2DP and is BT4.0x (or higher)
compatible (see 'Technical data' on
page 10).
I hear but cannot control music on my
Bluetooth device (e.g. play/pause/skip
forward/backward).
Make sure the Bluetooth audio source
supports AVRCP (see 'Technical data'
on page 10).
The volume level of the earpieces is
too low.
Some Bluetooth devices cannot link the
volume level with the earpieces through
volume sync. In this case, you have to
adjust the volume on your Bluetooth
device independently to achieve an
appropriate volume level.
15
Advertisement
Table of Contents
