Installation - Kenwood KDOI60X20 Installation Instructions Manual

Installation

• The cooker must be installed by a competent person, if in doubt consult a qualified technician, and in
compliance with local electrical, safety and building regulation standards.
• If the cooker is installed adjacent to furniture which is higher than the hob, a gap of at least 100 mm must be
left between the side of the cooker and the furniture unless non-combustible materials (e.g., ceramic tiles,
metal splashback, etc.) are used which then allows this distance to be reduced to 20 mm.
• The furniture walls adjacent to the cooker must be made of heat resistant material (check with your furniture
supplier). The veneered synthetic material and the glue used must be resistant to a temperature of 100°C in
order to avoid ungluing or deformations.
• The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a room containing
a bath or shower.
• Flammable materials such as curtains, wood, etc. must not be fitted immediately behind the appliance or
within 500 mm of the sides.
• Do not place next to a refrigerator.
• This cooker must NOT be placed on a pedestal or base.
• It is essential that the cooker is positioned as stated or freestanding taking into account the distances of any
combustible materials detailed above.
• Any cooker hoods must be installed according to the requirements of the cooker hood instruction/installation
manual but no less than 650 mm.
• Any cupboards placed directly above the cooker must be no less than 700 mm.
Cupboard
For all dimensions marked "X", please
refer to the information below:
X : 100mm for combustible materials
20mm for non-combustible materials.
* All images are for indication only; please refer to your individual unit for actual item.
36
Kenwood Free Standing Electric Double Oven KDOI60X20 Manual.indd 36 Kenwood Free Standing Electric Double Oven KDOI60X20 Manual.indd 36
Cooker Hood Cupboard
18/01/2021 14:36 18/01/2021 14:36