Mitsubishi Electric FR-F840-00023 Installation Manuallines page 34

BASIC OPERATION
5.1.2 Basic operation (factory setting)
Operation mode switchover/frequency setting
External operation mode (At power-ON)
Parameter setting mode (At power-ON)
Parameter setting mode
*5
Group parameter setting
Function mode
Long press
*1
For the details of operation modes, refer to the FR-F800 Instruction Manual.
*2
Monitored items can be changed. (Refer to the FR-F800 Instruction Manual.)
*3
For the details, refer to the FR-F800 Instruction Manual.
*4
For the details of faults history, refer to the FR-F800 Instruction Manual.
*5
The USB memory mode will appear if a USB memory device is connected. Refer to the FR-F800 Instruction Manual for the USB
memory mode.
28
*1
PU operation mode
Value change
Output current monitor
*2
Value change
Parameter clear All parameter clear
Automatic parameter setting
(Example)
Flickering
Faults history 1
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
*1
Frequency setting has been written
*2
Faults history clear
IPM parameter initialization
*3
Trace function
(Example)
Flickering
*4
Faults history 2
is displayed.
*1
PU JOG operation mode
Flicker
Example
and completed!
*2
Output voltage monitor
Display the present
setting
Parameter write is completed!
Parameter copy
Initial value change list
*3
PID gain tuning
(Example)
Flickering
*4 *4
Faults history 8