HP 81200 User Manual page 191

How to View Captured Test Results
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
How to Save Captured Data as a New Segment
To convert captured data to a new segment:
1 When the Error State Display is active, open the File menu and choose
Save Segment As.
2 Enter the new segment's file name.
3 Click OK.
N O TE
Before using the segment for interpreting received data, check and, if
necessary, change the state coding (see "How to Create a Memory
Segment" on page 158).
How to Copy Captured Data Into a Segment
To copy captured data into a new or existing segment:
1 Put the Error State Display in Capture mode.
2 Drag the cursor across the trace numbers.
This highlights all the captured data. You can of course also highlight a
data section.
Figure 102 Highlighted Captured Data
3 Open the context menu and choose Copy.
This copies the data to the clipboard.
4 Create a new memory segment (see "How to Create a New Segment" on
page 157).
When creating the segment, ensure that it is long and wide enough to
hold the pattern you wish to include.
Viewing Generated and Captured Data
191