Do you have a question about the XDCPA9BT and is the answer not in the manual?
Questions and answers
dick goodwin
March 3, 2025
unit will not play radio stations
1 comments:
Mr. Anderson
March 3, 2025
The Dual XDCPA9BT unit may not play radio stations due to the following possible reasons:
1. Antenna Connection Issue – Ensure the antenna is properly connected to the unit. 2. Weak Signal Reception – The unit may be in an area with weak FM/AM signals. Try relocating the vehicle or adjusting the antenna. 3. Tuning Issue – Ensure the correct frequency range is selected: - FM: 87.5MHz - 107.9MHz - AM: 530kHz - 1710kHz 4. Speaker Wire Issues – Speaker wires touching the chassis ground or each other may cause problems. Check and insulate all bare wires. 5. Fuse Issue – An incorrect fuse rating can cause malfunctions. Use the correct fuse rating as specified.
Checking these factors may help restore radio functionality.
Am/fm receiver with bluetooth and fixed face (15 pages)
Summary of Contents for Dual XDCPA9BT
Page 1
XDCPA9BT INSTALLATION/OWNER’S MANUAL Multimedia Receiver with Android Auto™ and CarPlay™ featuring a 6.95" digital TFT Display...
Page 2
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
XDCPA9BT PREPARATION Table of Contents Page Warning Statement ..........
Page 4
XDCPA9BT PREPARATION WARNING Upon installation of this monitor/media player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or...
Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDCPA9BT is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
XDCPA9BT INSTALLATION Preparation Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
XDCPA9BT INSTALLATION Wiring Diagram - Inputs/Outputs EXTERNAL IR SENSOR WIRE FUSE MAIN HARNESS IR Sensor PARKING BRAKE ·External IR Sensor REVERSE SWC - 3.5mm JACK GRAY GRAY REMOTE TURN-ON DC 12V VIOLET VIOLET DC 12V Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage.
XDCPA9BT OPERATION Control Locations Mode Volume Down Power / Mute Voice Control Volume Up Remote Control Volume Up Volume Down Mute / Voice Control (long press) Tune/Track Up Tune/Track Down...
XDCPA9BT OPERATION Remote Control Preparation Remove battery insulation tape prior to first use. To install a new battery, remove the battery cover and the old battery, then insert the new battery making sure to keep the (+) side up. Replace the battery cover to secure.
XDCPA9BT OPERATION General Operation Power On/Off Momentarily press to turn the unit on. Press and hold to turn the unit off. Volume Rotate the volume knob to increase or decrease the volume level. Mute Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume.
Page 11
XDCPA9BT OPERATION General Operation From the Main Menu screen, select Settings to access the Setup menu Setup Menu and select from eight categories represented by the icons on the top of the screen: System, Fader/Balance, Equalizer, Surround, Supwoofer, Display, Time Settings and Miscellaneous. Select the category, and adjust any of the available options using the touch screen.
XDCPA9BT OPERATION AM/FM Tuner Operation Radio Operation Select the Radio icon from the Main Menu screen. Press to return to Main Menu screen. Main Menu Displays current mode of operation. Current Mode Indicator Local / Distance Press to toggle between Local and DIstance tuning.
XDCPA9BT OPERATION USB Operation To play audio files from a USB device, connect a device to the rear USB cable and playback will begin automatically. To return to USB playback from another mode of operation, select the USB icon in the Main Menu.
XDCPA9BT OPERATION Media Compatibility File Type FAT 12 File System FAT 16/FAT 32 .mp3/.MP3/.Mp3/.mP3 File Extension .rmp/.m4a MPEG 1 MPEG MPEG 2 Format MPEG 2.5 MPEG 1 32/44.1/48kHz Sampling MPEG 2 12/16/22.05/24kHz Frequency MPEG 2.5 8/11.025/12kHz...
Page 15
XDCPA9BT OPERATION Media Compatibility Media Compatibility The following types of files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • MP3 PRO format, MP3 playlists • RMP format • WAV format •...
Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. The device name is "XDCPA9BT". The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once.
Page 17
XDCPA9BT OPERATION Bluetooth Operation Bluetooth Talk Press to connect a call. Bluetooth Music Press to transfer audio between the unit and mobile phone. Backspace When dialing, press to erase the last digit. Clear When dialing, press to clear all digits entered.
XDCPA9BT OPERATION Apple CarPlay Operation Apple CarPlay™ is a smart interface for iPhone, allowing you to voice-control (via Siri) music, navigation, phone and messaging apps - significantly reducing driver distraction. Phone - Use Siri to make calls, return missed calls, listen to voicemail messages, and view the caller ID on the receiver’s screen.
Page 19
XDCPA9BT OPERATION Apple CarPlay Operation When the CarPlay menu is displayed, the home button in the lower left corner work just like the home button on your iPhone. Press and hold it to summon Siri and begin your voice commands.
XDCPA9BT OPERATION Android Auto™ Operation Android Auto™ brings the most useful apps to your phone screen or your compatible car display, in a format that makes it easy for you to keep your main focus on driving. You can control things like navigation and maps, calls and text messages, and music.
Page 21
XDCPA9BT OPERATION Android Auto™ Operation Using Android Auto™ The Android Auto™ home screen displays personalized information, like time to your destination, reminders, recent calls incoming messages, the song you're listening to, and Google Now cards. When the Android Auto™ menu is displayed, you can say "OK Google" or select the microphone in the upper right corner to talk to Google.
XDCPA9BT OPERATION iPod Operation Connect an iPod to the unit's rear USB input, and the unit will automatically Connecting an iPod begin iPod playback. To return to iPod playback from another mode of operation, select the iPod icon in the Main Menu.
XDCPA9BT OPERATION Rear RCA Aux Input Auxiliary Input Connect an optional audio source into the RCA (rear) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the device).
The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is recommended. A third-party adapter must be used in order for the XDCPA9BT to be compatible with any steering wheel controls. The following controls are available for most vehicles.
Please keep your original sales receipt and be prepared to provide this receipt in the event you require service, as your original receipt is considered the best proof of purchase and indicates the date you purchased your Dual product. Dealer Name...
4. For more information and for the location of the original retail purchaser for products purchased from nearest authorized service center please contact an authorized Dual dealer and used in the U.S.A. us by one of the following methods: What is covered? This warranty covers all defects •...
Need help?
Do you have a question about the XDCPA9BT and is the answer not in the manual?
Questions and answers
unit will not play radio stations
The Dual XDCPA9BT unit may not play radio stations due to the following possible reasons:
1. Antenna Connection Issue – Ensure the antenna is properly connected to the unit.
2. Weak Signal Reception – The unit may be in an area with weak FM/AM signals. Try relocating the vehicle or adjusting the antenna.
3. Tuning Issue – Ensure the correct frequency range is selected:
- FM: 87.5MHz - 107.9MHz
- AM: 530kHz - 1710kHz
4. Speaker Wire Issues – Speaker wires touching the chassis ground or each other may cause problems. Check and insulate all bare wires.
5. Fuse Issue – An incorrect fuse rating can cause malfunctions. Use the correct fuse rating as specified.
Checking these factors may help restore radio functionality.
This answer is automatically generated