Component Parts, Vessels And Connection Assembly - flamco Flamcomat MK-U G4 Installation And Operating Instruction

5.5 Component parts, vessels and connection assembly

1 Basic steel vessel with built-in, exchangeable butyl-rubber bladder for
absorption of the expansion water. Exterior corrosion protected, interior
untreated (interior coa-ted***)
2 Vessel name plate
2a Control unit name plate
2b Advice to remove transport seal
2c Pressurisation warning
3 Inspection opening
4 Inspection opening MK-U 6500-10000
5 Lift ing hook, load suspension for transport
6 Anti-collision protection (compressed air connections)
7 Foot-height adjuster
8 Foot pressure plate MK-U 5000-10000
9 Adjusting screw (transport seal volume sensor, removal)
10 Bleed valve
11 Cover nut (anti-collision protection for bleed valve)
12 Float vent**
13 quick-release coupling, connector
14 Pressure hose, flexible, couplings both sides, length 3000 mm**
15 Pressure hose, flexible, to compressed air comparment of vessel
16 Pressure hose, flexible, to pressure sensor
17 Pressure hose, flexible, to safety valve, M-K 400-3500
18 Pressure hose, flexible, to compressor 1;2** )k*
19 Pressure hose, flexible, to system connection, MK-U 400-10000
20 System connection M-K, angle 90° 400-3500 l
21 System connection MK-U
22 Connection assembly pressurisation, safety valve compressed air
compartment compressed air compartment valve 1 (1.1***), discharge valve
2; 2.1** )k*, non-return valve 1; 2** )k*, pressure connection to compressed air
compartment, pressure connection to compressor 1; 2 )k*
Manual Flamcomat MK-U G4
23 Connection assembly pressurisation***, safety valve compressed air
compartment compressed air compartment valve 1, pressurisation valve,
non-return valve, pressure connection to compressed air compartment,
pressure connection to compressor
24 Safety valve to compressed air compartment
25 Compressor unit K01 - K03, oil-free
26 Second compressor unit K01 - K03, oil-free
27 Compressor unit K04, oil-free
28 Second compressor unit K04, oil-free
29 Compressor thermal protection, manual reset
30 Intake opening compressor
31 Cooling air inlet compressor
32 Ball valve vessel drain
33 Ball valve system connection
34 Ball valve condensate drain
35 Control unit Flextronic
36 Power cable compressor 1, 2** )k*
37 Signal wire pressure sensor (SELV)
38 Pressure sensor
39 Signal wire volume sensor (SELV)
40 Volume sensor
41 Bladder rupture sensor**
42 Transport seal pressure sensor
43 Water compartment (expansion water)
44 Bladder
45 Compressed air compartment
** accessory, optional extra
*** available as special model
)k* second compressor unit
SELV: Safety Extra-Low Voltage design (Safety Extra-Low Voltage)
We reserve the right to change designs and technical specifications of our products.
14