Chapter 2 Operation; Before Turning On The Power - Hitachi HF-W6500 Instruction Manual

CHAPTER 2 OPERATION

2.1 Before Turning On the Power

If any of the air intake and exhaust holes of the equipment is blocked, the
temperature inside the equipment may rise and that may cause a fire or failure of
the equipment. Make sure sufficient clearance is provided around the equipment
when you install. (See "1.6.2 Installation".)
< NOTE >
When you turn on the power, see the following:
・ "PRECAUTIONS 1. PRECAUTIONS ABOUT THE EQUIPMENT
(2) INTERFACE CABLES
・ "PRECAUTIONS 1. PRECAUTIONS ABOUT THE EQUIPMENT
(4) POWER SUPPLY"
・ "PRECAUTIONS 1. PRECAUTIONS ABOUT THE EQUIPMENT
(5) INSTALLATION ENVIRONMENT"
WARNING
2-1
2. OPERATION