Figure 6-14 Removing Cover Screws - Hitachi HF-W6500 Instruction Manual

(3) Removing cover screws
[1] Remove the four cover screws using a Phillips screwdriver.
< NOTE >
・ Save the rubber feet, and keep them in a safe place for later use.
When you install the equipment on the mounting metal fitting for vertical
installation, do not use set screws for the cover to secure the equipment. If you
use the set screws for the cover, the equipment may fall and personal injury may
result.
(4) Installing rubber feet and cover screws
Align the rubber feet with the holes on the bottom of the equipment and push down
the cap at the center of each rubber foot.

Figure 6-14 Removing cover screws

CAUTION
6-23
6. CHECKUP AND MAINTENANCE
Cover screw