Personal Protective Equipment; Owner Responsibilities; General Notes On Property And Product Damage - Bosch rexroth PE 2/X Assembly Instructions Manual

Table of Contents

Advertisement

10/40

General notes on property and product damage

During maintenance
and servicing
During disposal
During cleaning
Bosch Rexroth AG, MIT: PE 2/X, PE 2/H, PE 4, 3 842 564 350/2020-06
• Make sure that access to maintenance and inspection points is kept unobstructed.
• Perform the prescribed maintenance work at the intervals prescribed in section
10.3 on service.
• Make sure that no line connectors, connections or components are disconnected
as long as the system is supplied with pressure and voltage. Secure the system
against being switched back on.
• Dispose of the product in accordance with the regulations in your country.

2.7 Personal protective equipment

• Wear appropriate protective clothing when handling the product
(e.g., safety shoes, close-fi tting clothing, a hair net for long, loose hair).
As the system user or operator, you are personally responsible for ensuring the use
of appropriate protective equipment when the product is being used.
All pieces the personal protective equipment must be intact.

2.8 Owner responsibilities

• Before initially starting up or restarting any conveyor system, run a risk assessment
in accordance with DIN EN ISO 12100.
• Please also observe the residual risks of the individual components (see section
8.1 "Residual risks" on page 25).
• Before initial start-up, make sure there are no protruding or sharp-edged parts that
may be a hazard to personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before initial start-up
or restarting, and then at regular intervals.
3 General notes on property and product
damage
The warranty only applies to the delivered confi guration.
• The warranty is void in the event of faulty installation, start-up and operation,
as well as improper use and/or improper handling.
• Prevent cleaning agents from getting into the system.
• Never use solvents or corrosive cleaning agents.
• Do not use a pressure washer for cleaning.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents