Adjusting The Ringer Volume; Changing The Ring Tone - Sanyo A5514SA Operating Instructions Manual

Adjusting the Ringer Volume
1
From the Standby screen, press .
2
Using , choose [Ｓｅｔｔｉｎｇｓ] and
press [Ｓｅｌｅｃｔ].
3
Using , choose [Ｓｏｕｎｄ／Ｖｉｂｒａｔｉｏｎ] and
press [Ｓｅｌｅｃｔ].
4
Using , choose [Ｉｎｃｏｍｉｎｇ Ｃａｌｌ] and
press [Ｓｅｌｅｃｔ].
The current settings for the Standard Ring
will be displayed.
5
Using , choose [Ｖｏｌｕｍｅ] and
press [Ｓｅｌｅｃｔ].
The volume can be adjusted at 5 levels.
： Increase Volume
： Decrease Volume
●By pressing [Ｃｏｎｆｉｒｍ] , the volume level will be set.
●By setting it to S(OFF), the ringer will be silent.
●Using , the ringer can also be set to Step Down/Step Up
Step Down :Ringer volume gradually reduces.
Step Up :Ringer volume gradually increases.
13
6
Using , adjust the volume and
press [Ｓｅｌｅｃｔ].
7
Press [Ｃｏｍｐｌｅｔｅ].
Changing the Ring Tone
<Example> Setting the ring tone to [Original]
1
Follow the instructions on P.13.
After step 4, using choose [Ｓｏｕｎｄ] and
press [Ｓｅｌｅｃｔ].
2
Using , choose [Ｏｒｉｇｉｎａｌ] and
press [Ｓｅｌｅｃｔ].
A list of ring tones will be displayed.
●By pressing [Confirm], the selected ring tone will
be selected.
3
Using , choose a ring tone and
press [Ｓｅｌｅｃｔ].
4
［Ｃｏｍｐｌｅｔｅ］ を押す
The ring tone will be changed.
14