Advertisement
- InfiniMax™ Brake System (Toro™ Rocket, Toro™ Beast) –
The InfiniMax™ brake system allows almost limitless adjustability to handle any fishing
situation. It combines a sealed centrifugal brake system with a magnetic brake, giving anglers
superior casting control. This is sometimes referred to as a dual brake system.
Sealed Centrifugal brake: As the spool spins, centrifugal force causes the "spring loaded" brake
blocks to engage by moving away from the center of the spool. This force prevents the spool
from over running at the start of the cast. The blocks retract during the second stage of the cast
as the spool slows down to allow for maximum distance. Additionally, the brake blocks are
sealed inside the plate which prevents them from popping off and getting lost.
Access the adjustment pins by removing the palm sideplate (see Removing the Sideplate
instructions in section G. for details) Disengage (i.e. turn off) the centrifugal brake by sliding all
pins towards the center of the spool until they click into position. The brake blocks are now
locked in the off position and will not move out away from the center of the spool. To engage
this feature (i.e. turn on the brake blocks) slide any combination of pins towards the outside of
the spool until they click into place. Any combination of brake blocks can be engaged or
disengaged to apply more or less brake pressure. For example, turn on all six blocks for the most
pressure or turn on just one or two for less pressure and more distance. When a brake block is
set in the "on" position, it will be able to move towards the outer edge of the spool.
The addition of the magnetic brake adds consistent braking pressure throughout the entire cast
resulting in smooth, controlled casts. A turn of the dial towards the "MAX" setting moves the
magnetic braking system closer to the spool. As the magnets get closer to the spool, they apply
more braking force and slow the rotation of the spool.
Advertisement
