Specifications - Sharp GF-320A Service Manual

P L E A S E R E F E R T O T H E O P E R A T I O N M A N U A L
G E N E R A L
AC 240 V, 50 Hz
Power source:
DC 9 V (UM/SUM-1 or R20 x 6)
Output power: P M P O ; 2 0 W ( l o w + low)
(AC operation)
MPO;
(AC operation)
RMS;
(DC operation, 10% distortion)
External mic; 600 ohms
Loaded impedance: Headphones; 8-25 ohms
External speakers; 4-8 ohms
Dimensions:
W i d t h ; 4 9 4 m m (19-l/2" )
Height; 180 mm (7-l/8" )
D e p t h ; 130 m m (5-l/8" )
Weight: 2.8 kg (6.2 Ibs.) without
batteries
1. Wind the dial cord over the tuning control and attach the
tuning control to the front cabinet.
2. Set the dial cord over the boss (A).
3. Set the dial cord over the bosses (B) and (C).
All manuals and user guides at all-guides.com
Tuning control shaft (Knob)
RADIO
Frequency range: FM; 87.6 - 108 MHz
A M ; 5 2 6 . 5 - 1,606.5 kHz
TAPE RECORDER
Tape: Compact cassette tape
Frequency response : 100 Hz - 10,000 Hz
Signal/noise ratio:
36 dB
Wow and flutter: 0.2% (WRMS)
SPEAKER
Speakers:
Horn type tweeter x 2
Impedance:
4 ohms
Maximum power
handling capacity: 5 W (maximum)
Specifications for this model are subject to change without
prior notice.
Dial Poind &kg Point /
Figure 2- 1