Troubleshooting - Electrolux EasyLine ESI4007 Instruction Book

TroUBlEShooTINg

PROBLEM
The soleplate is not heating
even though the iron is
turned on.
The iron does not produce
steam.
The spray function does not
work.
The steam jet and vertical
steam jet functions does not
work.
Brown streaks come out of
the soleplate while ironing
and stain the linen.
Water leakage
www.electrolux.com
POSSIBLE CAUSE
Connection problem.
The temperature selector is in "min"
position.
Not enough water in tank.
Steam selector is set in non-steam
position.
The selected temperature is lower
than that specified to use with
steam.
Not enough water in tank.
The steam jet function was used
very frequently within a short
period.
The iron is not hot enough.
You have used hard water, which
has caused scale flakes to develop
in the water tank.
You have used chemical descaling
agents.
Fabric fibres have accumulated in
the holes of the soleplate and are
burning.
The fabrics might not be properly
rinsed or the garments are new
and have not been washed before
ironing.
The soleplate is not hot enough.
Too much water in the water tank.
Water is left in the water tank after
previous use.
Impurities buildup in the steam
chamber.
SOLUTION
Check the main power supply cable,
plug, and outlet.
Select adequate temperature.
Fill the water tank (see "Getting started",
no 2).
Set the steam selector to
Increase the temperature to at least
Fill the water tank (see "Getting started",
no 2).
Put the iron in a horizontal position and
wait before using the steam jet function.
Adjust the proper temperature to steam
ironing (up to ). Put the iron in vertical
position and wait until the temperature
indicator light turns min.
Use the self-clean function one or more
times.
Do not use any descaling agents.
Use the self-clean function one or more
times. Clean the soleplate with a damp
soft cloth.
Please rinse the laundry properly again.
Turn the Steam Selector to the desired
steam position after the iron is heated
up.
Ensure that the water level does not
exceed the "max" line.
Ensure that the water tank is empty after
every use.
Perform self-cleaning on the iron on a
regular basis to minimise the impurities
buildup.
EN
CNS
CNT
KR
ID
or .
TH
.
VN
7