Fujitsu F2MC-8L Operation Manual page 8

I Connecting the probe header to a user system
To connect the probe header and the user system, connect the probe header to the NQPACK064RZ
mounted on the user system using the YQPACK064RZ.
YQPACK064RZ or NQPACK064RZ is clipped) indicates the first pin on the YQPACK064RZ and on
the NQPACK064RZ. Mount the probe header by using the index marks to align the first pins.
After connecting the probe header to the user system, secure the probe header using the supplied
screws. Secure the probe header to the NQPACK064RZ by inserting the screws in the holes drilled
in the four corners of the mounting part of the MCU. Be sure to secure the probe header evenly at
the four corners with the screws. Tightening the screws too much may damage the probe header
and NQPACK064RZ.
*: The NQPACK064RZ and screws for securing the probe header are supplied with the product.
Probe header
YQPACK064RZ
NQPACK064RZ
WARNING
Electric shock
6
Figure 3-4 Connecting the probe header to a user system
To prevent an electric shock when connecting the probe header and user system, turn
off the product and any connected devices and unplug the power cable from the outlet
before making the connection.
An index mark (one corner of the
Screws for securing
the probe header
User system