Fujitsu F2MC-8L Operation Manual page 10

4. Note on Using the MB2144-222 and MB2144-222-01
A limit exists on the height of components to be mounted on the user board around the probe header
to ensure connection between the probe header and the user system.
Take this limit into consideration when designing a PC board for the user system.
*: The height from the user system to the probe header varies depending on the mating status
of the connection of the NQPACK064RZ and YQPACK064RZ.
8
67.4 mm
Figure 4-1 Probe header dimensions
42.0 mm
Approximately 14 mm