Timer Operation; Operate Easy To Use Timer (O.t.t.); Sleep Timer - Kenwood R-SE9T Instruction Manual

Fm/am receiver cd player cassette tape deck
Hide thumbs Also See for R-SE9T:
Table of Contents

Advertisement

Timer operation

Operate easy To use Timer (O.T.T.)

Playback of the selected input source starts at the specified time, and the pow er is sw itched off after one
hour. This timer operates only once directly after setting.

Sleep timer

The pow er is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording
Playback of the selected source (or broadcast recording) w ill be executed for the set time.
AI timer playback
When timer playback starts, the volume increases gradually.
Adjust the clock before setting the timer.
Operate easy To use Timer (O.T.T.)
Timer playback is possible simply by setting the time.
The source selected last before the power was switched
off will be played. One hour after start of timer play-
back, the power will be switched off automatically.
1 Select the source to be played and set the
volume.
2 Sw itch OFF the pow er supply.
3 Press the N.B. key.
4 Set the ON time.
5 Press the "enter" key.
Adjust the clock before setting the timer.
Sleep timer
Set the number of minutes after w hich the pow er
is to be turned OFF.
1 Turn the pow er ON.
2 Set the time.
Downloaded from:
http://www.usersmanualguide.com/
N.B.
multi control
To increase
To decrease
the figure
the figure
enter
SLEEP
Adjust the clock before setting the timer.
The program timer does not operate during
playback by the O.T.T. timer.
÷ When the N.B. key is pressed, the input source w ill be
displayed, and after a few seconds, the ON time w ill be
displayed.
ON time display
A M
÷ The ON time can be set in steps of 5 minutes.
÷ In case of combination w ith another timer, the input
source w hich operated last w ill be played.
To cancel
Press the N.B. key tw ice w hile the pow er is OFF.
÷ The pow er is turned OFF automatically after the set time
has elapsed.
÷ Each press decreases the time by 10 minutes. The
maximum time that can be set is 90 minutes.
90=80=70...30=20=10=Cancel=90=80...
Lights
SLEEP
9 )
Duration for sleep timer
To cancel
Turn the pow er OFF or press the SLEEP key until
the sleep time is cancelled.
45
Timer operation
R-SE9 T/ DP-SE9 / X-SE9 (En)
R-SE9T
7 ) )
:
O.T.T.
Blinks
R-SE9T

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-se9X-se9

Table of Contents