Assembly Steps - Matador PALLADIUM 6 BURNER BBQ Manual

ASSEMBL Y STEPS
Remove all packaging and transit protection materials from
Remove all packaging and transit protection materials from parts before assembly.
Wear gloves during assembly to protect your hands from cuts and abrasions.
STEP 1
Some stages of assembly require a 2 person lift.
Assemble the base weight (34) on the bottom panel of cabine
STEP 1
2pcs and spring washer (C) 2pcs as shown.
Assemble the base weight (34) on the bottom panel of cabinet (12) by bolt (I) 2pcs
and nut (J) 2pcs and washer (B) 2pcs and spring washer (C) 2pcs as shown.
Assemble the door magnet panel (19) on the bottom panel of
Assemble the door magnet panel (19) on the bottom panel of cabinet (12) by bolt
Assemble the plastic backing board (22) on the bottom pane
(A) 2pcs as shown. Assemble the plastic backing board (22) on the bottom panel of
cabinet (12) by bolt (E) 3pcs and nut (F) 3pcs as shown.
shown.
STEP 2
Assemble the castor without lock (20) and castor with lock (21)
washer (C), washer (B) each 16pcs as shown.
Assembly