Table of Contents
Advertisement
CAUTION: Contents
are heavy. Exercise
caution and correct lifting
positions when removing
from packaging.
4 B U R N E R A N D 6 B U R N E R
edge
B U I L T - I N B B Q ' S
GB0103 & GB0104
Retain manual for future reference.
Before using the BBQ,
remove any packaging
material within and
around the BBQ
supplied for protection
during transit.
Advertisement
Table of Contents
Related Manuals for Matador EDGE GB0103
Summary of Contents for Matador EDGE GB0103
- Page 1 CAUTION: Contents Before using the BBQ, are heavy. Exercise remove any packaging caution and correct lifting material within and positions when removing around the BBQ from packaging. supplied for protection during transit. edge 4 B U R N E R A N D 6 B U R N E R B U I L T - I N B B Q ’...
-
Page 2: Table Of Contents
Bunnings Warehouse. For service and GB0103 GB0104 warranty queries, please contact Mayo Hardware at Length 818 mm 1025 mm matador@mayohardware.com.au (without hanging brackets) or call; Length 898 mm 1105 mm 1300 360 211 (AUS) (with hanging brackets) 09 415 6240 (NZ) -
Page 3: Features & Benefits
PRESSURE: 2.75 kPa PRESSURE: 2.75 kPa PRESSURE: 2.75 kPa NG: 51.2 Mj/h NG: 76.8 Mj/h NG: 8 Mj/h INJECTOR SIZE: INJECTOR SIZE: INJECTOR SIZE: 1.69 mm 1.69 mm 1.35 mm PRESSURE: 1.0 kPa PRESSURE: 1.0 kPa PRESSURE: 1.0 kPa MATADOR INSTRUCTION MANUAL... -
Page 4: Safety Information
• When operating and handling the barbecue and parts please have this information at hand. your matador edge barbecue date of purchase..........model number............serial no..............date of manufacture......... - Page 5 If gas is burning try to not extinguish it, having the gas burn off is better than letting the pressure build up and potentially lead to an explosion. IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULL Y BEFORE USE! UNIVERSAL LPG GAS ONL Y MATADOR INSTRUCTION MANUAL...
-
Page 6: Do's & Don'ts
Do’s & Don’ts DO’S DON’TS • DO NOT install the barbecue closer than 1 • Use inspected exchanged gas cylinders and/ meter on the sides or 1 meter in the back to or have cylinders filled by an authorised LPG any combustible surface or less than 1 metre supplier in your country. -
Page 7: Gas Cylinders
If the information above is not followed exactly, a CYLINDER VALVE fire causing death or serious injury may occur. BLACK COUPLING NUT BLEED-OFF Turn clockwise to connect VALVE ALWAYS STORE GAS Turn clockwise REGULATOR to reseal CYLINDER IN A WELL VENTILATED AREA MATADOR INSTRUCTION MANUAL... -
Page 8: Positioning The Bbq
Positioning the BBQ the side, back and front wall areas shall be and • This BBQ shall only be used in an above ground remain open and unrestricted. open-air situation with natural ventilation, without stagnant areas, where gas leakage and •... - Page 9 BARBECUES MUST BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER’S INSTALLATION INSTRUCTIONS, LOCAL GAS FITTING REGULATIONS, MUNICIPAL BUILDING CODES AND THE GAS INSTALLATION CODE AS/NZS 5601 MATADOR INSTRUCTION MANUAL...
-
Page 10: Gas Leak Test
Gas Leak Test The gas connections on your barbecue were leak tested at the factory before shipment, however a complete leak test must be done during assembly. This leak test must also be conducted every time you connect the regulator to the gas cylinder for safe operation. -
Page 11: Using Your Barbecue
When cooking we recommend using long utensils that Step 4 - If the burner does not light, return are specifically designed for use on barbecues. control knob to the OFF position and wait 2 minutes before trying again. MATADOR INSTRUCTION MANUAL... -
Page 12: Care And Maintenance
If you purchased an EDGE 6 burner barbecue you will have been supplied with an extension rod (see image below) that is designed to be used with the Matador rotisserie kit. It is essential that you use this extension rod so that your rotisserie kit will function correctly. - Page 13 Your barbecue has a combination of painted and • When new or when cleaned and dried, we stainless steel external surfaces that need to be recommend you apply a thin coat of cooking maintained. oil to stainless steel surfaces which should then MATADOR INSTRUCTION MANUAL...
- Page 14 Care & Maintenance Replacing a Hood Light be polished in. This oil will protect the stainless Globe steel from corrosive contaminants and assist in the removal of finger prints and other marks. Please follow the following procedure to replace a •...
-
Page 15: Natural Gas Conversion
“NATURAL GAS” sticker STEP - 5 To complete the installation process that comes with your conversion kit, the installer must conduct the leak test on the over the top of the factory placed “UNIVERSAL LPG ONL Y” sticker. barbecue. MATADOR INSTRUCTION MANUAL... - Page 16 Exploded Parts Diagram EDGE 4 BURNER BUIL T-IN BARBECUE...
- Page 17 Exploded Parts Diagram EDGE 6 BURNER BUIL T-IN BARBECUE MATADOR INSTRUCTION MANUAL...
- Page 18 Infrared Rear Burner Solid Hot Plate Grid Tool Warming Rack AAA Battery (not shown) Power Adaptor For Technical Assistance and spare parts advice Call Mayo Hardware on (AUS) 1300 360 211 (NZ) 09 415 6240 or email us at matador@mayohardware.com.au...
-
Page 19: Installation Options
1025 mm 841 mm 1047 mm PLEASE NOTE: Fasteners are NOT included for the securing of the Power Adaptor. Please consult your hardware specialist for the appropriate fasteners that are compatible the surface that you are mounting to. MATADOR INSTRUCTION MANUAL... - Page 20 Installation Options OPTION 2 - Benchtop Installation 1 M Clearance when building a barbecue enclosure you must conform with the specifications on page 21 of this manual. They outline the requirements for safely housing your gas cylinder. 645mm 570mm 140mm 309mm Minimum Power Adaptor...
-
Page 21: Hardware List
In addition to the instructional guides you will also find useful tips, recipes and available barbecue Symbol: The following symbols will be shown in each procedure for indication of tightening the bolt accessories. and nut if necessary. MATADOR INSTRUCTION MANUAL... - Page 22 Assembly Instructions Step 1 (OPTION A) - Attach Hanging Brackets FOR HANGING INSTALLATION Parts / Hardware Needed NOTE: This stage will require a Phillips Hanging Bracket head screwdriver. The Hanging Brackets (5) are non- handed and can be used on either Firebox side.
- Page 23 Do this at the front and rear of the Leg Support (6). 1.3 Repeat this assembly process on the right hand side with Right Hand Leg Support (13). 6/13 MATADOR INSTRUCTION MANUAL...
- Page 24 Assembly Instructions Step 2 - Assemble the Grease Tray ALL MODELS Parts / Hardware Needed NOTE: This stage will require a Phillips Grease Tray head screwdriver. Left Hand Grease Tray Bracket Front Grease Tray Bracket Right Hand Grease Tray Bracket M4 x 8mm Pan Head Screw M4 x 10mm...
- Page 25 This stage will require a Phillips Grease Tray head screwdriver. Handle M4 x 8mm Pan Head Screw 3.1 Using 6 M4 x 8mm screws (A) attach the front Grease Tray Handle (9) to the brackets attached in Step 3. MATADOR INSTRUCTION MANUAL...
- Page 26 Assembly Instructions Step 4 - Grease Tray and Cup Installation LEG SUPPORT INSTALLATION (1B) SHOWN FOR REFERENCE Parts Needed Grease Cup 4.1 The Grease Tray (7) and Grease Cup (11) are removed and inserted from the front of your barbecue for your convenience.
- Page 27 NOTE: It is important that the Solid Hot Plate is located on the right hand side of the barbecue above the burners that DO NOT have the flame tamers on them. INSERT BATTERY WITH ‘+’ END FACING OUT FROM THE BBQ. MATADOR INSTRUCTION MANUAL...
- Page 28 Assembly Instructions Step 6 - Final Assembly LEG SUPPORT INSTALLATION (1B) SHOWN FOR REFERENCE Your EDGE Barbecue comes supplied with a Grate Tool (22) which is design to help you lift the Cooking Grate (1) from the Firebox (19) when needed for cleaning and maintenance. You must use this tool to avoid damaging the Cooking Grates (1) with other tools.
-
Page 29: Troubleshooting
Check the barbecue is connected to the power source and turned on. Hood Lights will come on Power not connected to barbecue Check the barbecue is connected to the power source and turned on. Globes may need replacing Replace globe in light fitting MATADOR INSTRUCTION MANUAL... -
Page 30: Technical Information
PRESSURE INP/BURN TOTAL (mm) (kPa) (Mj/h) (Mj/h) 1.09 6 x 15.3 GB0104 ULPG: 2.75 100.50 MATADOR EDGE 0.85 1 x 8.7 1.69 6 x 12.8 BUILT-IN 6 BNR 1.00 84.80 1.35 1 x 8 1.09 4 x 15.3 GB0103 ULPG: 2.75... - Page 31 Spare Parts 6BNR BARBECUE PARTS SHOWN FOR REFERENCE 123/124 1/65 46/97 2/66 67/121 108/117 39/91 42/93 114/118 43/94 115/119 116/120 MATADOR INSTRUCTION MANUAL...
- Page 32 Spare Parts Spare Name ORDER Spare Name ORDER Part Code Part Code 3B / 6B Solid Hot Plate GB0111 Grate Lifter GB0160 Rear Burner 3B / 6B Cooking Grate GB0112 GB0161 Thermocouple Assembly Rear Burner Ignition Flame Tamer Support Bracket GB0113 GB0162 Needle...
- Page 33 MATADOR WARRANTY Thank you for purchasing one of our quality Matador BBQs. YOUR MATADOR BBQ IS COVERED AGAINST DEFECTS FOR A PERIOD OF 5 YEARS FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT. THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSED BY ABUSE OR NEGLECT.
- Page 34 To make a claim under warranty, take the product (with proof of purchase) to any Bunnings store (see www. bunnings.com.au for store locations) or contact Mayo Hardware Pty Ltd matador@mayohardware.com.au. Mayo Hardware Pty Ltd bears reasonable, direct, expenses of claiming under warranty. You may submit details and proof to Mayo Hardware Pty Ltd for consideration.
- Page 35 Register your BBQ REGISTERING YOUR BBQ FOR WARRANTY We recommend you register your Matador BBQ to make it easier for you in the event that you ever have any warranty claims. To register your warranty please scan the QR CODE below to be taken to our online registration page.
- Page 36 Visit www.matadorbbqs.com.au For technical and warranty support call 1300 360 211 (AUS) 09 415 6240 (NZ) Your purchase receipt will be required for warranty claims. For spares parts contact your local Bunnings Warehouse. PB0151g...
Need help?
Do you have a question about the EDGE GB0103 and is the answer not in the manual?
Questions and answers