1. Manuals
  2. Brands
  3. WANHAO Manuals
  4. 3D Printers
  5. GADOSO REVOLUTION 2
  6. User manual

WANHAO GADOSO REVOLUTION 2 User Manual

App remote operation
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GR2
user
manual
APP REMOTE OPERATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GADOSO REVOLUTION 2 and is the answer not in the manual?

Questions and answers

Related Manuals for WANHAO GADOSO REVOLUTION 2

Summary of Contents for WANHAO GADOSO REVOLUTION 2

  • Page 1 user manual APP REMOTE OPERATION...
  • Page 2 Read this manual carefully You will be able to set up with ease Visit our website for tutorial videos and guides www.wanhao3dprinter.com Join Wanhao Google forum for online support https://groups.google.com/forum/#!forum/wanhao-printer-3d Google Forum Email us! We’re always happy to hear from you Technical support: support@wanhao3dprinter.com...

  • Page 3: Warranty Details

    3D Printer WARRANTY DETAILS The pre-assembled WANHAO GR1 printer is covered by a 12-month warranty for USER over the world. The GR1 provides a 12-month warranty on the functionality of individual parts for end-users over the world. Wear and tear category components and consumables are excluded from this warranty. The warranty period begins with the day when the customer receives the goods.

  • Page 4: Safety Information

    SAFETY INFORMATION Read the instructions carefully. Keep this docu-ment for you to dangerous voltage points or other risks. future reference. Follow all warnings and instructions Refer all repairs to qualified service personnel. marked on the product. Observe the following guidelines Please send an email to your national supplier when connecting and discon-necting power to the or contact techincal service at:...
  • Page 5 SAFETY IRRITANT GUIDELINES Keep the printer and resins out of the reach of children. The resin is an irritant to skin and eyes. Always wear gloves when coming into contact with the liquid resin. Always use in a well ventialed room.

  • Page 6: Safety Instructions

    Before you get started, please read these safety instructions. CAUTION : WANHAO 3D Printers include moving parts that can cause injury. Never reach inside the WANHAO 3D Printer while it is in operation, and allow time for the printer to cool down after operation.
  • Page 7 The box contains TENTS POWER CABLE USB CABLE WIRE FEEDING TUBE GR2 3D PRINTER SHOVEL 4G U DISK FILAMENT SHAFT WIRE SUPPORT DIGITAL PEN HEXAGON WRENCH CLEANING HOOK TWEEZERS 1KG FILAMENT HOT BED PRINT PAD...
  • Page 8 Technical Specifications Technical Specifications Software WANHAO Cura Extruder system MK10 Material support ABS, PLA Max printable area 200 * 200 * 175 mm Filament diameter/light 1.75MM Max printing speed 30 mm/s-100 mm/s Case material Steel case Extruder quantity 13kg Net weight(kg) Gross weight(kg) 14.8kg...
  • Page 9 Read this manual carefully, it will bring you great convenience Using GR2 for the first time...

  • Page 10: Product Overview

    Product Overview Printer Front View 1. MK11 Extruderv 4. LCD Screen 2. Printing Mat 5. SD Card slot 3. Double locking 6. USB Card slot Z Axis screw...
  • Page 11 Product Overview Printer Rear View 7. Cable Quick Coupler 10. Power Socket 8. Cable Locker 11. Power Switch 9. USB Socket...
  • Page 12 first commissioning Initial settings Plug in and turn on the power,When "I" is on, the printer is officially started. Step 1: Wifi connection options will appear on the current page. This step is critical and will be used later when your phone is connected to the printer.
  • Page 13 Step2: Here will prompt "Please download the WANHAO playSmart APP", which is an important reminder about how the mobile phone will operate the printer in the future. You can download this software through the mobile APP, then click on I ’ve already After the firmware update, the system got the WANHAO PlaySmart mobile APP.
  • Page 14 Application installation Open the mobile app store and enter WANHAO to search for the black logo download. Select Account login account password login interface. Open the mobile APP to present the Select APP printer to load the scanning WANHAO application interface.
  • Page 15 Find on GR2 【Settings - pair the printer】 to get the QR code interface and serial number. How to connect a printer? 1. Scan QR Code with your phone. 2. Manual Input serial number that comes with the printer manually. Open Workspace select a printer and connect the name you noted.

  • Page 16: Interface Introduction

    Interface introduction 1. File induction, click to 7. Display print time 12. Determine the select SD card import and print completion selected data and or USB import model rate. start execution. file. 8. Setting interface is 13. Enter filament 2. File induction, click to the main interface adjustment interface.
  • Page 17 Bed levelling After leaving the factory, the GR2 is generally leveled and debugged by WANHAO inspection personnel, and there is a lock under the printing hot bed. If you have used it for a long time in the future and need to fine-tune it, you can use the following methods.

  • Page 18: Print Bed Calibration

    Print Bed Calibration Z-axis compensation There may be some special situations during the printing process, but you don't want to level it over and over again. At this time, we can use Z-axis compensation, which greatly saves your time, and you can also fine-tune your leveling. Get more accurate distance.

  • Page 19: Ready To Print

    Ready to print Install the filament Click to enter the filament icon in the lower right corner of the main interface. Please make sure you have a filament spool positioned over the spool holder, guided along the filament guide, with the filament in counter clockwise direction.
  • Page 20 Install the filament Click the"Load" button and a dialog box will appear asking you to wait for the thermal head temperature to rise to the specified temperature. After waiting for the double gears to feed, the system will prompt you if you need to continue loading 10mm.
  • Page 21 Install Cura Download and install Log in to www.wanhao3dprinter.com WANHAO official website, find the download, find the interface of Duplicator 6, you can find the CURA 18.04 version, although the time changes, you may need to update the software in the future.

  • Page 22: Cura Software Interface

    Cura software interface This is the main screen of Cura. Here you can choose which object or objects to print. And how you want them to be printed. 1. Load file 5. Print type profiles 9. Scale model options Click this button to load an 3 options to choose a print Option to change the scale of object to your print area.
  • Page 23 Cura software interface The following mouse actions are used to work, navigate and view the 3D model: Leftmouse button Scrollwheel button Select objects. Hold and move Use the scroll wheel to zoom the mouse to drag in or out. object on the 3D print area. Rightmouse button + Rightmouse button Shift...
  • Page 24 Introduction What is 3D Printing? 3D Printing is a process whereby a real object is created from a 3D Design. Fused Filament Fabrication (FFF) is one of the most common technologies used by 3D Printers to achieve this. FFF works on an ‘additive’ principle by laying down material, such as PLA or ABS filament, in layers to create a 3D object.
  • Page 25 3D models ranging from simple to complex. The WANHAO 3D Printer is compatible with a broad range of filament types and is capable of printing 3D models ranging from small and simple to complex objects with moving parts. What you...
  • Page 26 Setup Levelling the Heated Print Bed It is important to ensure the Heated Print Bed is level and set to approximately 0.1mm distance prior to printing. Press Tool → Move → Z Axis → + to Riaise the extruder.So that you can easily access the heated print bed.
  • Page 27 Setup Filament The WANHAO 3D Printer uses high quality PLA and ABS filaments. Only use quality WANHAO filaments as using generic filaments may damage your 3D Printer, affect the print quality and may void your warranty. Extra filament including multiple colours and types are available from the online store at id.aliexpress.com/store/120824...
  • Page 28 These PLA Alternatives require advanced knowledge of the 3D Printer. Please visit www.wanhao3dprinter.com for details of filament types and parameters. NOTE: Only use WANHAO Filament with your 3D Printer, using other filaments may damage your 3D Printer and may void your warranty.
  • Page 29 Setup Removing Filament: With the printer initialised, press the Navigation Dial to enter the menu system. Navigate to, and select Tool > Preheat PLA or Preheat ABS depending on the material. Check the temperature of the Extruder and plate on the LCD. When the temperatures are within a few degrees of the target, you are ready to remove the filament.
  • Page 30 Navigate to and select SD Card > Print > Print File Navigate to your desired GCODE File, then press the Dial to commence printing Your WANHAO 3D Printer will now heat up the Extruder and Heated Print Bed before printing your 3D object NOTE: If pressing print shows no files, chances are the SD Card has not been mounted.

  • Page 31: Using Cura

    A GCODE file provides the essential temperature settings and movement information for your WANHAO 3D Printer. A number of ‘Slicer’ software exists, which convert a 3D model file into a series of 3D printable layers. Cura is a free Open Source slicer software released on the AGPLv3 license.
  • Page 32 Using Cura Install CURA WANHAO edition onto your computer Double click the file: CURA_WANHAO_15.04.EXE Follow the instruction and click install and next. The software has already embedded all the basic settings for your Wanhao D9. Loading a 3D Design into Cura Clear the platform using File >...
  • Page 33 Using Cura Rotate The Rotate button will give you the ability to orient your model in along all three axes. Once you click the rotate button, three circles will surround your model. The red circle will allow you to rotate around the Z axis.
  • Page 34 Using Cura View Mode This mode allows you to view your model in a variety of different ways. This can be helpful for spotting issues before the print even starts. Normal This is the standard view and shows the solid outer surfaces of the model. Overhang Overhang mode shows where your model may need support material.
  • Page 35 Material Selection Choose your desired filament. The WANHAO 3D Printer includes a 10 metre sample of PLA to be used in your first print. Other filaments are available for purchase at id.aliexpress.com/store/120824 Diameter Ensure this is always set to match the filament diameter.
  • Page 36 Shell Thickness (mm) This defines the number of vertical walls that comprise the outside of your model. We recommend keeping this set to multiples of your nozzle width. Your WANHAO 3D Printer is equipped with a 0.4 mm nozzle.
  • Page 37 Using Cura Enable Retraction Retraction tells your printer to pull filament out of the Extruder upon travel moves. Travel moves are when your print head moves from one area of the print, to another without laying down filament. We recommend keeping this on for all filament types, and adjusting the retraction length and speed for the specific filament.
  • Page 38 Using Cura SUPPORT Support Type Some models will require support material in order to print properly. This will usually occur when an object has an angle in relation to the Heated Print Bede between 0 to 45 degrees. It is highly recommended to orient your object so that it minimizes or eliminates the need for support.
  • Page 39 Nozzle Size (mm) This defines your nozzle size. The slicing engine uses this value combined with your other settings to determine how quickly to feed filament into your Extruder. The WANHAO 3D Printer uses a 0.4mm nozzle. RETRACTION Speed (mm/s)
  • Page 40 This will control how thick your first printed layer height is printed onto the Heated Print Bed. Having a larger initial layer height will help prevent your part from popping off the plate. Your WANHAO 3D Printer auto levelling system could be affected if you change this from the standard profiles. Adjust at your own risk.
  • Page 41 Using Cura Outer Shell Speed (mm/s) This will be the outermost surface of the model. This is the most important setting, as it controls the speed of your print head on the visible layers. As a general rule of thumb, the slower you go the better looking print you will get.
  • Page 42 Using Cura Plugins Tab Plugins are custom settings which will alter your print at specific points. The two that come pre-loaded with Cura are Tweak at Z, and Pause at Height. More plugins and information can be found here: http://wiki.ultimaker.com/Category:CuraPlugin To activate one of these highlight the desired plugin and click the drop-down arrow directly below the Plugins box.
  • Page 43 Using Cura Expert Settings Expert settings will give you more specific options for your retraction, skirt, active cooling, infill, support, brim, raft, and special settings. To gain access to this section you go to Expert > Open Expert Settings or on your keyboard press Control + E. Retraction Retraction pulls filament out of your nozzle when it is not extruding to prevent your print head from dripping on your object.
  • Page 44 Using Cura Skirt Skirt creates a line around the outside of your object. This is most commonly used to prime the Extruder. In order to prevent missed filament at the beginning of a print, we recommend you leave this setting on. Line Count This will define the number of loops the Skirt creates around the outside of your object.
  • Page 45 Using Cura Support You define how your support material is generated here. You must have a support type in the ‘Basic Settings; in order for these support settings to have an effect. Structure Type You can choose between a ‘Grid’ or a ‘Line’ pattern for your support material. The grid will be a checkerboard pattern in the X and Y direction.
  • Page 46 Using Cura Brim Brim circles the base of the print while making contact, helping adhere the print to the Heated Print Bed. This is only one layer thick, and can be easily removed post-print. This section defines how the brim is formed when brim is activated in ‘Basic Settings’. Brim Line Amount This will determine the distance the brim will cover around the outside of your object.
  • Page 47 Using Cura Airgap This will define the distance between your raft and your print. A larger gap will make your part easier to remove, but will make the bottom of your print look worse. Surface Layers This will determine the number of layers that create the ‘platform’ of your raft. If you have a wide line spacing, you may want to increase this number to ensure a solid platform.
  • Page 48 SOME 3D MODELS AND OTHER MATERIALS ARE REFERENCED FROM THE FOLLOWING WEBSITE Human Jaw by gebrin Aug 14, 2015 www.thingiverse.com/thing:968975...
  • Page 50 Make the most sincere good product DISPOSAL INSTRUCTIONS Do not throw this electronic device into the waste when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle or return to Photocentric for recycling. Phone: +86-571-6337-9578 (Hours: Mon to Sat from 8:30 AM to 5:00 PM CST China Time) Mail: ZHEJIANG WEIBIN 3D TECHNOLOGY CO.,LTD No.
  • Page 51 user manual APP REMOTE OPERATION...

This manual is also suitable for:

Gr2

Table of Contents