Safety Recommendations - Monnit PoE-X Dry Contact Sensor User Manual

DC-CF-PUG-01 (06/20)
Monnit, iMonnit and all other trademarks are property of Monnit, Corp. © 2020 Monnit Corp. All Rights Reserved.
Monnit Corporation
3400 South West Temple Salt Lake City, UT 84115 801-561-5555
www.monnit.com
SAFETY RECOMMENDATIONS - READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be avoided in the
following areas:
- Where it can interfere with other electronic devices in environments such as
hospitals, airports, aircraft, etc.
- Where there is risk of explosion such as gasoline stations, oil refineries, etc.
It is responsibility of the user to enforce the country regulation and the specific
environment regulation.
Do not disassemble the product; any mark of tampering will compromise the
warranty validity. We recommend following the instructions of this user guide for
correct setup and use of the product.
Please handle the product with care, avoiding any dropping and contact with the
internal circuit board as electrostatic discharges may damage the product itself.
The European Community provides some Directives for the electronic equipment
introduced on the market. All the relevant information? s is available on the
European Community website:
http://ec.europa.eu/enterprise/sectors/rtte/documents/
The text of the Directive 99/05 regarding telecommunication equipment is
available, while the applicable Directives (Low Voltage and EMC) are available
at: http://ec.europa.eu/enterprise/sectors/electrical
Additional Information and Support
For additional information or more detailed instructions on how to use your
Monnit Sensors or the iMonnit Online System, please visit us on the web at
https://www.monnit.com/support/documentation.
PAGE 25