CGS Instruments SAM-1000_DP2 Operating Instructions Manual page 68

E
Figure 6-4 Lines
In the parameter screen „lines" every analysis point can be given a name . With the button at the right
side of the name the visibility of the analysis point on the state screen is set .
„Local" Enable/disable local operation at the panel
„Fuse" Enable/disable the display of fuse control
„PSL" Enable/disable the display of pressure monitoring
„FSL" Enable/disable the display of flow monitoring
visible / enabled
invisible / disabled
Product:
SAM-1000_DP2 Revision 1.1 – Issue June 2016
68/94