c)
microSD card
4. Follow the procedure in
Solid state drive (SSD)
Removing the SSD
1.
NOTE:
This system has option to fit two form factors (M.2 2242 and M.2 2230) SSD / eMMC cards. This is achieved
by removing, inverting and, installing the extender to an alternate location as marked on the palmrest.
Follow the procedure in
2. Remove the:
a)
microSD card
b)
base cover
c)
battery
3. Remove the single M2xL4 screw securing the SSD on the extender [1].
4. Remove the SSD from the M.2 slot on the system board [2].
Figure 11. M.2 2230 SSD
Installing the SSD
1. Install the SSD in the M.2 bracket [1] and secure it using the single M2xL4 screw [2] securing it to the extender.
42
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.