2.
NOTE:
This procedure illustrates a 3-cell 42 WHr battery, a 4-cell 56 WHr battery mounts is slightly bigger in size
and mounts to different mount points on the palmrest.
Insert the battery into the slot on the computer [1] and align the battery and the screw hole on the palmrest [2].
3. Install the battery support bracket [1] and install the two M2.0xL3 screws securing the battery to the palmrest [2].
4. Install the metallic bracket [3] and the single M2.0xL3 screw to retain the battery [4] to the palmrest.
Disassembly and reassembly
37